We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Cardboard spool with matte PLA filament in resealable vacuum bag

LORDWORLD

LORDWORLD Matte PLA Filament 1.75mm 1kg Cardboard Spool

SKU CH-S5KG-RJKHV

Matte PLA filament on a 1 kg cardboard spool with 1.75 mm diameter, 99 % dimensional accuracy and ±0.03 mm tolerance, vacuum-sealed with desiccant

  • Reliable prints backed by ISO-certified quality control
  • Accurate extrusion with 99% dimensional tolerance of +/- 0.03 mm
  • Moisture-free storage via 100% vacuum-sealed resealable bag with desiccant
  • Wide print window from nozzle 210±20 and bed 25-60
  • Flexible speed range of 40-70 mm/s for varied projects

LORDWORLD Matte PLA Filament 1.75mm

This matte-finish PLA filament comes on a one-kilogram cardboard spool and is aimed at hobbyists and makers who use FDM 3D printers. The 1.75-millimetre diameter suits the vast majority of desktop machines. Buyers who need a different diameter or a non-matte surface should look elsewhere.

Dimensional accuracy 99% ±0.03 mm

The supplier states a dimensional accuracy of ninety-nine percent with a tolerance of plus or minus zero point zero three millimetres. This single figure determines whether the filament will feed reliably through your extruder without jams or inconsistent layer lines.

Vacuum-sealed with desiccant

The spool ships in a resealable vacuum bag that includes desiccant, so you can reseal it after opening to keep moisture out. Moisture absorption is the usual cause of bubbling and nozzle clogging during prints. Follow the recommended nozzle temperature of two hundred and ten degrees Celsius plus or minus twenty, bed temperature of twenty-five to sixty degrees, and print speed of forty to seventy millimetres per second for best results.

Highlights

  • Reliable prints backed by ISO-certified quality control
  • Accurate extrusion with 99% dimensional tolerance of +/- 0.03 mm
  • Moisture-free storage via 100% vacuum-sealed resealable bag with desiccant
  • Wide print window from nozzle 210±20 and bed 25-60
  • Flexible speed range of 40-70 mm/s for varied projects

Specifications

BrandLORDWORLD

Questions about this item

What does the 99% dimensional accuracy with ±0.03 mm tolerance mean for my prints?

It keeps the 1.75 mm filament diameter tightly controlled, reducing extruder skipping and giving consistent layer adhesion across the whole spool.

How do the recommended nozzle and bed temperature ranges cap real-world printing?

Nozzle at 210±20 °C and bed at 25-60 °C set the practical window; outside this range you risk under-extrusion or warping on typical FDM machines.

What does the 1 kg cardboard spool need to mount on my printer?

The spool fits standard filament holders that accept a 1 kg cardboard core; check your printer’s holder width and flange clearance before loading.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.