We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green PCB adapter card with M-key M.2 slot and PCIe x4 edge connector

LORDWORLD

LORDWORLD M-Key NVME to PCI-E 3.0 x4 Adapter

SKU CH-KC6P-61JM8

Converts M-key M.2 NVME SSDs to PCI-E 3.0 x4 for Z97 or later motherboards running Windows 10 or later

  • Converts M-key NVME drives to PCI-E 3.0 x4 without speed loss
  • Supports 2230 2242 2260 2280 M.2 card dimensions for broad compatibility
  • Works transparently with no drivers needed on Windows 10 or later
  • Requires Z97 or later motherboard for proper operation
  • Compatible with XP941 SM951 PM951 A110 m6e 960 EVO SSD models

M-Key NVMe to PCI-E 3.0 x4 Adapter

This adapter converts an M-key NGFF NVMe SSD into a PCI-E 3.0 x4 add-in card. It accepts M.2 form factors 2230, 2242, 2260 and 2280 without altering drive speed or properties. The board is transparent to the operating system and requires no software drivers. It targets builders adding NVMe storage to a desktop platform.

Suits Z97 or later motherboards with Windows 10

The adapter fits systems that provide a PCI-E x16 slot wired for x4 electrical connection and run Windows 10 or newer on a Z97-class or later chipset. It will not function on platforms lacking PCI-E 3.0 x4 support or on operating systems older than Windows 10. Builders using earlier chipsets or different OS versions should look elsewhere.

Requires M-key NVMe SSD and PCI-E 3.0 x4 slot

The single deciding specification is the M-key NVMe interface paired with a motherboard slot delivering PCI-E 3.0 x4 bandwidth. Only drives matching the listed M.2 lengths and keying will install correctly. Verify the drive key and slot wiring before purchase.

Highlights

  • Converts M-key NVME drives to PCI-E 3.0 x4 without speed loss
  • Supports 2230 2242 2260 2280 M.2 card dimensions for broad compatibility
  • Works transparently with no drivers needed on Windows 10 or later
  • Requires Z97 or later motherboard for proper operation
  • Compatible with XP941 SM951 PM951 A110 m6e 960 EVO SSD models

Specifications

BrandLORDWORLD

Questions about this item

How can I confirm the adapter is functioning correctly after installing an M-key NVME SSD?

The adapter is transparent to the operating system and requires no drivers. If the SSD appears in the BIOS and Windows 10 or later detects it at full PCI-E 3.0 x4 speed, the adapter is working as intended.

What comes in the box and what must I purchase separately?

The package includes the M-key NVME to PCI-E 3.0 x4 adapter board only. You must supply a compatible M-key NVME AHCI SSD in 2230, 2242, 2260 or 2280 form factor and a motherboard with a PCI-E x16 slot on Z97 or later chipset.

Which M.2 SSD lengths does this adapter support?

The adapter accepts type 2230, 2242, 2260 and 2280 M-key NGFF SSDs. Choose the length that matches your drive; all four sizes mount on the same board without modification.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.