We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green circuit board with M.2 slot and PCIe x16 edge connector

LORDWORLD

LORDWORLD M-Key NVME M.2 to PCI-E 3.0 16x X4 Adapter Without Bracket

SKU CH-80WS-BVXD1

Connects M-key NVMe M.2 SSDs (2230, 2242, 2260, 2280) to a PCIe 3.0 x4 slot without a bracket, preserving speed and requiring no drivers

  • Converts M-key M.2 NVME drives to PCI-E 3.0 x4 slots
  • Supports 2230, 2242, 2260 and 2280 form factors without speed loss
  • Works instantly with no driver installation required
  • Fits standard PCI-E 16x slots using x4 electrical connection
  • Bracket-free design for flexible mounting in tight cases

M.2 NVMe to PCIe 3.0 x4 adapter

This LORDWORLD adapter converts an M-key M.2 NVMe SSD into a PCIe 3.0 x4 add-in card. It supports 2230, 2242, 2260 and 2280 form factors for desktop installation. The device is transparent to the operating system and requires no software drivers. It is suited for builders adding NVMe storage to a spare PCIe slot.

Upgrading from board-mounted M.2 slots

Use this adapter when the motherboard lacks a free M-key M.2 slot or when the existing slot shares bandwidth with other controllers. The jump is worth it if the platform has an open PCIe 3.0 x4 or x16 slot and the SSD remains the performance bottleneck. It does not help if the board already provides a direct CPU-attached M.2 lane.

Driver-free installation in a PCIe slot

Insert the M.2 SSD into the adapter at the correct angle, secure it with the onboard screw, then seat the card into a PCIe x4 or x16 slot. No bracket is included so the rear I/O opening stays open; verify case clearance before purchase. The most common issue is forgetting the retention screw, which leaves the drive unseated and invisible to the BIOS.

Highlights

  • Converts M-key M.2 NVME drives to PCI-E 3.0 x4 slots
  • Supports 2230, 2242, 2260 and 2280 form factors without speed loss
  • Works instantly with no driver installation required
  • Fits standard PCI-E 16x slots using x4 electrical connection
  • Bracket-free design for flexible mounting in tight cases

Specifications

BrandLORDWORLD

Questions about this item

Does the adapter include a mounting bracket for the PCIe slot?

The adapter is supplied without a bracket so you will need to secure it using the case screw or a separate bracket.

How do I attach an M.2 drive to this card?

Insert the drive at an angle into the M-key slot, press it down, and fasten the retaining screw through the standoff that matches the drive length.

Will I need to replace the adapter when I upgrade to a longer M.2 drive?

The board has standoffs for 2230, 2242, 2260 and 2280 lengths so it accommodates all supported sizes without replacement.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.