We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

LORDWORLD

LORDWORLD M-Key NVME Extension Cable 40cm SFF-8654 2230-22110

SKU CH-5EMF-GVE8Y

Extends an M-key NVME drive from a 2242, 2260 or 2280 socket to 2230, 2240, 2260, 2280 or 22110 form factors using a 40 cm cable with an SFF-8654 connector

  • Extends NVME drives up to 40cm from the motherboard socket
  • SFF-8654 connector links two PCBAs for a secure signal path
  • Supports M-Key NVME sizes 2230 2240 2260 2280 22110
  • Works with 2242 2260 2280 motherboard sockets for flexible placement
  • Pure NVME extension only — no protocol conversion to or from SFF-8654

Extension cable with SFF-8654 connector

This 40cm male-to-female cable extends an NVME drive away from an M-Key socket. The kit includes two PCBAs and one cable that must be assembled together. It supports NVME extension only and cannot convert between NVME and SFF-8654 protocols. The link works with drives from 2230 up to 22110 length.

Builders moving an NVME slot

Suits anyone who needs to relocate an M-Key NVME drive to a different position inside a chassis or test fixture. The 40cm reach allows routing around larger components or into drive cages. Not for users who need protocol conversion between NVME and SFF-8654. Not for setups that require a shorter or longer fixed length than the supplied 40cm cable.

SFF-8654 connector and 40cm length

The single specification that decides fit is the SFF-8654 connector paired with the 40cm cable. Your motherboard or backplane must present an SFF-8654 receptacle and the drive must use an M-Key NVME interface. The assembly supports 2230, 2240, 2242, 2260, 2280 and 22110 drive lengths.

Highlights

  • Extends NVME drives up to 40cm from the motherboard socket
  • SFF-8654 connector links two PCBAs for a secure signal path
  • Supports M-Key NVME sizes 2230 2240 2260 2280 22110
  • Works with 2242 2260 2280 motherboard sockets for flexible placement
  • Pure NVME extension only — no protocol conversion to or from SFF-8654

Specifications

BrandLORDWORLD

Questions about this item

What clearance is needed for the 40cm cable and SFF-8654 connector to reach a 22110-length SSD?

The 40cm cable links two PCBAs, one plugging into the mainboard M-Key slot and the other accepting the SSD. Measure from the motherboard slot to the planned SSD location; the cable must not be stretched tight or bent sharply near the SFF-8654 connector.

Which step do installers often skip when joining the two PCBAs to the cable?

Both PCBAs must be firmly seated on the cable ends before the male PCBA is inserted into the mainboard M-Key slot and the female PCBA receives the SSD. Skipping either connection breaks the NVME signal path.

When should the SFF-8654 connector or cable be inspected or replaced?

Check the connector pins and cable jacket after any system move or if the SSD becomes undetected. Replace the assembly if pins are bent, the latch is damaged, or the cable shows kinks that could interrupt the NVME link.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.