We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
M.2 to PCIe adapter with flat 30cm cable and angled connector

LORDWORLD

LORDWORLD M.2 to PCIe 4.0 Extender Adapter 30cm

SKU CH-DFDW-4PP9D

Converts an M.2 NVMe slot into a PCIe X4 slot supporting X1, X8 and X16 cards with a 30cm flexible cable and SATA power

  • Converts an M.2 NVMe slot into a PCIe X4, X8, X1 or X16 connection
  • 30 cm flexible cable with flat foldable PCBA for tidy internal routing
  • Gold-plated contacts and high-TG PCB material reduce oxidation-related crashes
  • Includes a 12 V / 5 V SATA power cable for connected devices
  • PCIe 4.0, 3.0, 2.0 and 1.0 backward compatible though limited to M.2 link speed

M.2 NVMe to PCIe 4.0 Extender Kit

The LORDWORLD adapter converts an M-key NVMe slot on a motherboard into a standard PCIe slot. It includes two ultra-thin PCBAs and a 30cm flexible cable with gold-plated fingers. A 12V/5V SATA power cord is supplied for devices that require auxiliary power. Installation must be performed with the system powered off.

Suits builds adding a PCIe card where only an M.2

This extender works for users who need to connect a PCIe X4, X8, X1 or X16 device to an available NVMe socket. It is not for builders who require genuine PCIe 4.0 throughput, as the link operates at the speed of the host M.2 interface. Hot-plugging is unsupported, so the card cannot be swapped while the system runs.

Link speed follows the host M.2 interface

The adapter is labelled PCIe 4.0 but the supplier notes it cannot support PCIe 4.0 speeds; actual transfer rate depends entirely on the motherboard's M.2 implementation. Backwards compatibility with PCIe 3.0, 2.0 and 1.0 is maintained. Verify your board's M.2 generation before purchase to match expected bandwidth.

Highlights

  • Converts an M.2 NVMe slot into a PCIe X4, X8, X1 or X16 connection
  • 30 cm flexible cable with flat foldable PCBA for tidy internal routing
  • Gold-plated contacts and high-TG PCB material reduce oxidation-related crashes
  • Includes a 12 V / 5 V SATA power cable for connected devices
  • PCIe 4.0, 3.0, 2.0 and 1.0 backward compatible though limited to M.2 link speed

Specifications

BrandLORDWORLD

Questions about this item

Does the 30 cm cable and dual-PCBA design add noticeable latency or heat when the adapter runs continuously?

The ultra-thin, foldable PCBA with high-TG material and gold-plated fingers is designed for low-resistance signal integrity; no active cooling is required and the passive design adds negligible latency during all-day use.

What must my motherboard provide for this M.2-to-PCIe adapter to function?

An M-key NVMe slot that supplies a PCIe x4 link and a free SATA power connector for the included 12 V/5 V power cord; the board must be powered off during installation.

Will a PCIe 3.0 graphics card or x1 capture card work properly in the x4 slot this adapter provides?

Yes — the slot is backwards compatible with PCIe 3.0, 2.0 and 1.0 and accepts x1, x4, x8 or x16 cards, though bandwidth is limited to the host M.2 link speed.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.