LORDWORLD
LORDWORLD M.2 NVMe SSD 1TB PCIe 4.0 x4 2280 Graphene Heatsink
A 1 TB PCIe 4.0 x4 NVMe 2.0 drive with up to 7400 MB/s reads, 6500 MB/s writes, 600 TBW endurance and an included graphene heatsink
- Up to 7400 MB/s read speed for faster game loads
- Up to 6500 MB/s write speed for quick file saves
- PCIe 4.0 x4 interface with NVMe 2.0 protocol for modern compatibility
- 600 TBW endurance rating from TLC 3D NAND flash for long life
- DRAM-less design plus S.M.A.R.T. and TRIM support for cooler, efficient operation
1TB NVMe SSD with graphene heatsink
The LORDWORLD drive provides one terabyte of storage using a PCIe 4.0 x4 interface and the NVMe 2.0 protocol. It is built with TLC 3D NAND flash and rated for 600 TBW. The 2280 form factor suits modern desktops and laptops that have an M.2 slot wired for PCIe.
DRAM-less design for low heat and power
DRAM-less technology reduces heat output and power draw during normal workloads. A graphene heatsink is included to spread thermal load without adding bulk. The controller supports S.M.A.R.T. and TRIM for ongoing health monitoring and sustained performance.
Fits any M.2 2280 PCIe slot
Installation requires only a compatible M.2 2280 slot that routes four PCIe 4.0 lanes. No extra cables, brackets or power connectors are needed. The slim profile leaves room for other expansion cards or larger CPU coolers in compact builds.
Highlights
- Up to 7400 MB/s read speed for faster game loads
- Up to 6500 MB/s write speed for quick file saves
- PCIe 4.0 x4 interface with NVMe 2.0 protocol for modern compatibility
- 600 TBW endurance rating from TLC 3D NAND flash for long life
- DRAM-less design plus S.M.A.R.T. and TRIM support for cooler, efficient operation
Specifications
| Brand | LORDWORLD |
|---|
Questions about this item
How do I install the 2280 M.2 NVMe SSD and its graphene heatsink in a PCIe 4.0 x4 slot?
Insert the 2280 drive at an angle into the M.2 slot, press it down, and secure it with the motherboard screw; the graphene heatsink is pre-attached, so do not remove it or add thermal pads.
What maintenance or replacement will the TLC 3D NAND drive rated for 600 TBW need later?
The 600 TBW endurance rating covers typical heavy workloads; enable TRIM in the OS and monitor health via S.M.A.R.T. — no user-serviceable parts exist, so replace the drive only when S.M.A.R.T. warns of wear.
At what point does the PCIe 4.0 x4 NVMe 2.0 interface hit its limit during sustained transfers?
Sequential reads peak at 7400 MB/s and writes at 6500 MB/s; sustained workloads will throttle to lower speeds once the controller reaches its thermal limit.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Black Box Corporation
Black Box Corporation CAT6 EZ-RJ45 Modular Plugs 100-Pack
$95.99
0.00114286BTC
In stock
