We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Compact aluminum M.2 NVMe SATA enclosure with USB-C 3.2 Gen 2, tool-free sliding cover, thermal pad visible

LORDWORLD

LORDWORLD M.2 NVMe SATA Enclosure Adapter 10Gbps USB-C 3.2 Gen 2 2230-2280

SKU CH-CNG0-ZS8WR

Tool-free M.2 NVMe and SATA enclosure with aluminum heatsink supports 2230 to 2280 drives up to 4 TB at 10 Gbps over USB-C 3.2 Gen 2

  • Up to 1000MB/s read and write with NVMe SSD at 10Gbps
  • Up to 450MB/s read and write with SATA SSD at 5Gbps
  • Aluminum shell with thermal silicone and heatsink for heat dissipation
  • Tool-free one-click open and lock design with rubber fastener
  • Supports M.2 2230, 2242, 2260, 2280 NVMe and SATA SSDs up to 4TB

USB-C 3.2 Gen 2 M.2 Enclosure

The LORDWORLD adapter connects M.2 NVMe and SATA SSDs to a USB-C 3.2 Gen 2 port. It supports drives up to 4 TB in 2230, 2242, 2260 and 2280 lengths. A toolless, one-click latch secures the SSD without screws. The aluminium shell and thermal pad dissipate heat during sustained transfers.

NVMe 10 Gbps and SATA 5 Gbps limits

With an NVMe drive the enclosure reaches 10 Gbps and up to 1000 MB/s read and write. With a SATA drive the link runs at 5 Gbps and up to 450 MB/s. UASP and TRIM are supported on both protocols. The USB-C 3.2 Gen 2 interface caps NVMe performance at the stated figures.

Drive keying and capacity ceiling

The slot accepts M-key, B+M-key NVMe and B+M-key SATA SSDs only. Drives larger than 4 TB are not supported. Builders needing PCIe 4.0 or 5.0 speeds, or capacities above 4 TB, must choose a different enclosure.

Highlights

  • Up to 1000MB/s read and write with NVMe SSD at 10Gbps
  • Up to 450MB/s read and write with SATA SSD at 5Gbps
  • Aluminum shell with thermal silicone and heatsink for heat dissipation
  • Tool-free one-click open and lock design with rubber fastener
  • Supports M.2 2230, 2242, 2260, 2280 NVMe and SATA SSDs up to 4TB

Specifications

BrandLORDWORLD

Questions about this item

Which SSD lengths and key types does this enclosure accept?

It supports 2230, 2242, 2260 and 2280 form factors with M-key, B+M-key NVMe and B+M-key SATA drives up to 4 TB.

What real-world throughput can I expect when I put an NVMe drive inside?

The USB 3.2 Gen 2 link caps at 10 Gbps, so an NVMe SSD will top out around 1000 MB/s read and write.

Does the USB-C port run at full 10 Gbps or fall back to a lower speed?

The port is USB 3.2 Gen 2 at 10 Gbps for NVMe; SATA drives are limited to 5 Gbps and about 450 MB/s.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.