We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green circuit board adapter with gold edge connector and M.2 slot

LORDWORLD

LORDWORLD M.2 NVME SATA B Key to PCIe 3.0 X4 X8 X16 2230-2280 Adapter

SKU CH-MQJD-7X5PW

Adapts M.2 NVME and SATA B Key SSDs (2230 to 2280) to PCIe 3.0 X4 X8 X16 slots

  • Converts M.2 B-key SATA SSD to PCIe 3.0 x4 x8 x16 slot
  • Supports 2230 to 2280 form-factor drives for flexible installation
  • NVMe protocol compatibility extends drive usability across platforms
  • Good quality construction ensures reliable signal integrity
  • First listed July 2026 indicates current design revision

What the adapter does

This LORDWORLD adapter lets you install an M.2 NVME or SATA B Key solid-state drive into a PCIe 3.0 X4, X8 or X16 slot. It accepts drive lengths from 2230 to 2280 and is aimed at builders who want to add fast storage to a board that lacks a native M.2 connector.

Interface and speed limits

The card uses the PCIe 3.0 bus, so an NVME drive will run at Gen 3 speeds even if the drive itself supports a newer generation. A SATA-based B Key drive will operate at its native SATA throughput because the adapter does not convert the protocol. The slot width (X4, X8 or X16) does not increase the bandwidth beyond the drive's own link.

Check before ordering

Verify that your motherboard has a free PCIe 3.0 X4, X8 or X16 slot and that the BIOS can boot from an add-in M.2 device. Ensure the drive you plan to use is an M Key NVME or a B Key SATA model in the 2230 to 2280 length range. This adapter will not work with M Key SATA drives or with B Key NVME drives.

Highlights

  • Converts M.2 B-key SATA SSD to PCIe 3.0 x4 x8 x16 slot
  • Supports 2230 to 2280 form-factor drives for flexible installation
  • NVMe protocol compatibility extends drive usability across platforms
  • Good quality construction ensures reliable signal integrity
  • First listed July 2026 indicates current design revision

Specifications

BrandLORDWORLD

Questions about this item

Should I pick the 2230 or 2280 size for my SSD?

The adapter accepts both 2230 and 2280 lengths, so choose the one that matches your drive.

What does the PCIe 3.0 x4 link mean for my NVME drive speed?

It provides a PCIe 3.0 x4 connection, which sets the maximum bandwidth for the NVME SSD.

Can I use a SATA-based B-key drive in the M-key slot?

Yes, the card converts a SATA-based B-key drive to fit an M-key PCIe slot.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.