We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Right-angled M.2 to PCIe adapter with flat flexible cable and two PCBA boards

LORDWORLD

LORDWORLD M.2 NVMe Right-Angled 90° PCIe Extender Adapter

SKU CH-MKGG-4TA3Q

Converts an M.2 NVMe slot into a PCIe x4, x8, x1 or x16 slot via a 90-degree flexible cable with SATA power

  • Converts M.2 NVMe slot to PCIe X4 X8 X1 X16 for flexible expansion
  • Right-angled 90° design with ultra-thin foldable PCBAs saves space in tight builds
  • Flexible PVC-sheathed cable with copper conductors enables easy routing and durable daily use
  • Includes 12V/5V SATA power cable to deliver auxiliary power when connected
  • Gold-plated fingers on high-TG PCB ensure reliable conductivity and reduce oxidation risk

What it is

The LORDWORLD right-angled adapter converts an M.2 NVMe slot into a PCIe X4 slot using a 90-degree flexible cable. Two ultra-thin PCBAs and a flat PVC-insulated cable allow installation in tight spaces where a straight riser would not fit. The kit includes a SATA power cable delivering 12V and 5V rails. It is a new gadget for builders who need to relocate a PCIe device away from the motherboard.

Who it suits

This suits builders adding a PCIe X4, X1, X8 or X16 card to a system with a free M.2 NVMe M-key slot. It also helps when the card must sit parallel to the board in a slim chassis. Buyers who need PCIe 4.0 throughput should look elsewhere because the link is limited to the host M.2 speed and cannot run at 4.0. Anyone requiring hot-plug capability or a second M.2 drive must choose a different solution.

Build integration

Plug the primary PCBA into the motherboard M.2 slot, route the flexible cable, then attach the target card to the secondary PCBA. Connect the included SATA power lead to the PSU before powering on; the adapter draws 12V and 5V only when the cable is seated. Gold-plated fingers and high-TG PCB material maintain signal quality across the bend. Remember to power down the board first and align the key correctly, as the device does not support hot-plugging.

Highlights

  • Converts M.2 NVMe slot to PCIe X4 X8 X1 X16 for flexible expansion
  • Right-angled 90° design with ultra-thin foldable PCBAs saves space in tight builds
  • Flexible PVC-sheathed cable with copper conductors enables easy routing and durable daily use
  • Includes 12V/5V SATA power cable to deliver auxiliary power when connected
  • Gold-plated fingers on high-TG PCB ensure reliable conductivity and reduce oxidation risk

Specifications

BrandLORDWORLD

Questions about this item

What motherboard slot do I need free to plug this 90° M.2 NVMe extender into?

You need an available M-key M.2 slot sized for 2260 or 2280 drives on the motherboard.

Will a PCIe 3.0 graphics card or capture card run at full speed when connected through this adapter?

The adapter is limited to PCIe 3.0 signalling, so a PCIe 3.0 device will operate at its native speed; a PCIe 4.0 device will fall back to 3.0 speeds.

How can I verify the extender is functioning correctly after installation?

Power off the board, attach the SATA power cable, insert the target PCIe card, boot the system, and confirm the device appears in BIOS or Device Manager without errors.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.