We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green PCB adapter with right-angled M-key connector and flexible ribbon cable to PCIe slot, gold fingers visible

LORDWORLD

LORDWORLD M.2 NGFF NVMe M-Key 90 Degree PCIe X1 X4 X8 X16 Adapter for 2260 2280

SKU CH-BE4D-MXXF8

Converts an M-key NVMe slot into a PCIe x1, x4, x8 or x16 connection for 2260 and 2280 cards using a 90-degree angled adapter with included SATA power cable

  • Fits tight spaces with 90-degree M-key angled connector
  • Converts NVMe slot to PCIe X1 X4 X8 X16 for expansion cards
  • Flat foldable cable with gold-plated fingers for reliable signal
  • Includes dual PCBA boards and 12V/5V SATA power cable
  • PCIe 3.0/2.0/1.0 compatible — no PCIe 4.0 support

M.2 to PCIe adapter for 2260 and 2280 drives

The LORDWORLD adapter converts an M-key NVMe slot into a PCIe X1, X4, X8 or X16 connection. It accepts 2260 and 2280 form-factor drives and uses a 90-degree angled plug for tight clearances. The kit includes two ultra-thin PCBA boards and a 12V/5V SATA power cable.

Check motherboard slot key and power-off requirement

Verify the motherboard provides an M-key NVMe interface; the adapter will not work with B-key or SATA-only M.2 slots. The PCIe link speed follows the host slot and is limited to PCIe 3.0, 2.0 or 1.0 — PCIe 4.0 is not supported. Installation must be performed with the system powered off because hot-plugging is not supported.

Passive design with gold fingers for signal

The flat, foldable PCB uses high-frequency, low-resistance material and gold-plated fingers to maintain conductivity and reduce oxidation-related crashes. No active cooling is present; thermals and noise depend entirely on the installed PCIe device. Power is delivered through the external SATA cable only when it is connected.

Highlights

  • Fits tight spaces with 90-degree M-key angled connector
  • Converts NVMe slot to PCIe X1 X4 X8 X16 for expansion cards
  • Flat foldable cable with gold-plated fingers for reliable signal
  • Includes dual PCBA boards and 12V/5V SATA power cable
  • PCIe 3.0/2.0/1.0 compatible — no PCIe 4.0 support

Specifications

BrandLORDWORLD

Questions about this item

What comes in the box and is anything else needed?

The package contains two ultra-thin PCBA boards and a 12V/5V SATA power cable. No extra parts are required; the adapter draws power through that cable when connected.

Which M.2 drive sizes does the 90-degree M-key adapter accept?

It fits both 2260 and 2280 length drives that use an M-key NVMe interface. The right-angled plug lets you install the drive even when space around the motherboard slot is tight.

What bandwidth will a PCIe X4 card get through this adapter?

The slot runs at the speed of the host M.2 interface — PCIe 3.0, 2.0 or 1.0 — because the adapter cannot support PCIe 4.0. A PCIe X4, X8, X1 or X16 card will operate at whatever generation the M.2 link provides.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.