We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green circuit board with gold PCIe edge connector and M.2 slot

LORDWORLD

LORDWORLD M.2 M-Key NVME PCI-E 3.0 x16 Adapter 2230-22110

SKU CH-3X0A-BHJ0Y

Converts M-key NVME SSDs from 2230 to 22110 lengths into a PCI-E 3.0 x16 slot with no speed loss or driver needed

  • Adds M-key NVMe storage to PCIe 3.0 x16 slots
  • Keeps drive speed unchanged through passive form conversion
  • Fits 2230 to 22110 M.2 cards up to 110 mm
  • Works without drivers on Z97 or later motherboards
  • Requires Windows 10 or later for operation

Adapter purpose and audience

This LORDWORLD adapter converts an M-key M.2 NGFF SSD into a PCI-E 3.0 x16 card. It supports module lengths of 2230, 2242, 2260, 2280 and 22110. The board does not alter drive speed or properties and needs no driver installation. It suits builders adding NVME storage to a desktop with a free x16 slot.

Compatibility guidance

The adapter requires a motherboard with a Z97 or later chipset and Windows 10 or later. It will not work on older platforms or operating systems. Buyers whose board lacks a compatible slot or who need to install the drive in a laptop should look elsewhere.

Build integration

The card occupies a single PCI-E x16 slot and draws power from the slot itself. No extra cables or software are required. It frees the M.2 socket on the motherboard for another device while keeping the NVME drive at full PCI-E 3.0 x4 performance.

Highlights

  • Adds M-key NVMe storage to PCIe 3.0 x16 slots
  • Keeps drive speed unchanged through passive form conversion
  • Fits 2230 to 22110 M.2 cards up to 110 mm
  • Works without drivers on Z97 or later motherboards
  • Requires Windows 10 or later for operation

Specifications

BrandLORDWORLD

Questions about this item

Does my motherboard need a Z97 or later chipset to use this M.2 M-key adapter?

Yes, the system requirement specifies a Z97 or later motherboard for the PCI-E 3.0 x16 slot to recognise the NVME drive.

Will my existing 2280-length NVME SSD fit on this board?

The adapter supports 2230, 2242, 2260, 2280 and 22110 form factors, so a 2280 drive mounts directly.

How can I confirm the NVME drive is running at full PCI-E 3.0 x4 speed after installation?

Check the link width and speed in Device Manager or a tool like HWInfo; it should show PCIe 3.0 x4 with no driver install needed.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.