We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small green circuit board with M.2 B-key edge connector and micro SD card slot, 22 by 42 mm

LORDWORLD

LORDWORLD M.2 B-Key 22x42mm to Micro SD Adapter

SKU CH-ZRPG-4NNNS

Converts a micro SD card into a 2242 M.2 B-key SATA SSD with plug-and-play driverless operation

  • Converts micro SD to M.2 B-Key SSD using S682 chipset
  • Works with DOS, Windows 98 through 11 and Linux without drivers
  • SATA Gen1 at 1.5 Gbps and Gen2 at 3.0 Gbps for 150 MB/s and 300 MB/s speeds
  • Fits 22x42 mm M.2 slot in desktops, laptops and industrial boards
  • Cold-plug design with LED activity indicator for reliable data mobility

Purpose & Audience

The LORDWORLD adapter converts a micro SD card into a 22x42mm M.2 B-key SATA SSD. It targets industrial engineers and embedded-system builders who need removable solid-state storage in compact motherboards, thin clients, POS terminals or soft routers.

Build & Connectors

The board uses a S682 chipset and matches the 2242 M.2 form factor for direct slot insertion. A micro SD socket sits on the PCB, so the card can be swapped without tools, but the supplier advises cold-plugging only — power down before inserting or removing either the M.2 module or the micro SD card.

Interface Limits

The bridge operates at SATA Gen 1 (1.5 Gbps, 150 MB/s) or Gen 2 (3.0 Gbps, 300 MB/s), so throughput is capped by the SATA link rather than the micro SD media. No driver is required across DOS, Windows 98 through 11, or Linux, but the micro SD card must be initialised and formatted on first use or after any configuration change.

Highlights

  • Converts micro SD to M.2 B-Key SSD using S682 chipset
  • Works with DOS, Windows 98 through 11 and Linux without drivers
  • SATA Gen1 at 1.5 Gbps and Gen2 at 3.0 Gbps for 150 MB/s and 300 MB/s speeds
  • Fits 22x42 mm M.2 slot in desktops, laptops and industrial boards
  • Cold-plug design with LED activity indicator for reliable data mobility

Specifications

BrandLORDWORLD

Questions about this item

What SATA speeds does the M.2 B-Key 2242 adapter support and what are the resulting data rates?

It works with SATA GEN1 at 1.5 gbps giving 150 mb/s and SATA Gen2 at 3.0 gbps giving 300 mb/s.

What physical slot and card size does this adapter require to fit?

It needs an M.2 B-Key 22x42 mm slot and accepts a micro SD card in the onboard TF socket.

How do I install the adapter and what is the step users often miss?

Insert the micro SD card into the TF socket first, then plug the adapter into the M.2 slot with the system powered off; after first use or a card change you must initialise and format the card before storing data.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.