We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

LORDWORLD

LORDWORLD JMB582 SATA NGFF B+M to NVME M-Key Adapter

SKU CH-35ZT-WX8FT

Converts a SATA NGFF B+M SSD (2230, 2242, 2260, 2280) to an NVME M-Key slot using a JMB582 chipset on a 22×110 mm PCB

  • Converts SATA NGFF B+M SSDs to NVME M-Key motherboard slots
  • JMB582 controller enables SATA-to-NVME protocol translation on desktop boards
  • Compact 22 x 110 mm card fits standard PCI-E expansion space
  • Accepts 2230, 2242, 2260 and 2280 length SATA NGFF drives
  • 6 mm slot height designed for desktop use, not laptop M-Key sockets

What this adapter does

This LORDWORLD board lets you plug a SATA NGFF Key B+M solid-state drive into a desktop motherboard PCI-E NVME M-key slot. It is aimed at builders who want to reuse an existing SATA M.2 module on a newer platform that only offers NVME connectors. The 22 by 110 millimetre circuit board carries a JMB582 bridge chip to handle the protocol translation.

Installation notes

The adapter accepts SATA NGFF drives in 2230, 2242, 2260 and 2280 lengths and slides into a standard M-key socket. The NGFF slot sits 6 millimetres high so it will not fit inside a laptop M-key slot; check chassis clearance before ordering. No extra drivers are required for the bridge to appear to the operating system.

Sustained operation

Under continuous workloads the JMB582 maintains the SATA link speed without thermal throttling because the small board has no heavy components to generate heat. Performance stays consistent for long file transfers or backup jobs rather than peaking only in short bursts. The passive design means there is no fan noise to manage in quiet builds.

Highlights

  • Converts SATA NGFF B+M SSDs to NVME M-Key motherboard slots
  • JMB582 controller enables SATA-to-NVME protocol translation on desktop boards
  • Compact 22 x 110 mm card fits standard PCI-E expansion space
  • Accepts 2230, 2242, 2260 and 2280 length SATA NGFF drives
  • 6 mm slot height designed for desktop use, not laptop M-Key sockets

Specifications

BrandLORDWORLD

Questions about this item

How can I confirm the adapter is working after installation?

The system BIOS or operating system should detect the connected SATA NGFF SSD when the adapter is seated in a desktop motherboard PCI-E NVME M-key port.

What comes in the box and what must I source separately?

The adapter board with the JMB582 chipset is included; you must provide a compatible SATA NGFF Key B+M SSD in 2230, 2242, 2260 or 2280 form factor.

Which SSD lengths does the 22×110 mm board support?

The NGFF Key B+M slot accepts SATA SSDs sized 2230, 2242, 2260 and 2280.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.