We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black right-angled adapter with IEC C8 and C7 connectors

LORDWORLD

LORDWORLD IEC 320 C8 to C7 90 Degree Right Angled Adapter

SKU CH-NX1G-Q48B9

A right-angled IEC C8 to C7 power adapter rated for 10A at 125V and 2.5A at 250V

  • Fits tight spaces with 90 degree right-angled design
  • Connects IEC 320 C8 inlet to C7 plug securely
  • Handles 10A at 125V for standard power needs
  • Supports 2.5A at 250V for higher voltage use
  • Two-pole connectors on both ends ensure stable connection

IEC 320 C8 to C7 angled adapter

This right-angled adapter converts an IEC 320 C8 inlet to a C7 plug, allowing the cable to run close to the device in tight spaces. It handles up to 10A at 125V or 2.5A at 250V. The 90 degree bend reduces strain on the socket and keeps the cable tidy behind equipment.

Suits setups needing a low-profile C7 connection

Builders who require a three-pole earthed connector or a different current rating cannot use this adapter. It is also unsuitable for any application that exceeds the stated voltage and current limits.

90 degree right-angled C8 to C7 conversion

The defining specification is the 90 degree right-angle geometry combined with the IEC 320 C8 to C7 two-pole interface. This determines whether the adapter fits the available clearance and matches the device inlet.

Highlights

  • Fits tight spaces with 90 degree right-angled design
  • Connects IEC 320 C8 inlet to C7 plug securely
  • Handles 10A at 125V for standard power needs
  • Supports 2.5A at 250V for higher voltage use
  • Two-pole connectors on both ends ensure stable connection

Specifications

BrandLORDWORLD

Questions about this item

Should I choose the C8 or C7 side for my device?

The adapter has a C8 plug on one end and a C7 socket on the other; match the C8 side to your equipment inlet and the C7 side to the power cord.

What does the 10A 125V rating mean when I plug it in?

It allows up to 10 amps at 125 volts, so typical low-power devices such as laptop chargers or small appliances stay well within the limit.

How does the IEC 320 standard cap the current at 250V?

At 250 volts the same connector pair is rated for only 2.5 amps, so the adapter will carry less current on higher-voltage supplies.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.