We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

LORDWORLD

LORDWORLD IEC 320 C14 to C13 90° Angled Adapter 2 Pack 10A 250V

SKU CH-CM2X-K6KWQ

Two 90-degree IEC 320 C14 to C13 adapters with opposite orientations fit tight spaces and carry 10 A at 250 V

  • Fits tight spaces with 90° angled design
  • Two adapters with opposite connection directions
  • Handles 10A current at 250V rating
  • Works with IEC 320 C14 to C13 equipment
  • Suits PDU, UPS, server and peripheral power needs

Right-Angle Power Adapters for Tight Spaces

This two-pack provides IEC 320 C14 male to C13 female connectors with a 90 degree bend. Each unit handles up to 10A at 250V for reliable power delivery. The set includes adapters with different connection directions to suit varying port orientations. They are built for monitors, computers, printers and similar equipment.

Fits Crowded PDU and Chassis Ports

The right-angle profile lets you plug into female C13 sockets even when surrounding clearance is limited. This reduces cable strain and keeps wiring neat inside server racks, UPS units or desktop setups. No extra cables or tools are required for installation. The pair gives flexibility when multiple adjacent ports face different ways.

Steady 10A Capacity Under Continuous Load

Rated for 10A at 250V, the adapters maintain consistent current flow during extended operation. The angled housing does not restrict the conductor path, so heat buildup stays minimal in typical PDU or server converter use. They are not intended for loads exceeding the stated rating or for devices needing a straight-through connector.

Highlights

  • Fits tight spaces with 90° angled design
  • Two adapters with opposite connection directions
  • Handles 10A current at 250V rating
  • Works with IEC 320 C14 to C13 equipment
  • Suits PDU, UPS, server and peripheral power needs

Specifications

BrandLORDWORLD

Questions about this item

Does the 10 A rating hold up during continuous server use?

The adapter is rated for 10 A at 250 V, so it will carry that current continuously as long as the connected equipment and wiring also meet the same rating.

Will the angled body get hot or make noise when powering a PDU all day?

The adapter has no moving parts or active cooling, so it runs silently and only warms slightly under normal load within its 10 A limit.

Do I need an existing IEC 320 C14 inlet on my equipment to use these?

Yes, one end plugs into a C14 inlet and the other accepts a C13 plug, so both the power source and the device must use that connector pair.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.