We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small green circuit board with 44-pin IDE connector and SATA port

LORDWORLD

LORDWORLD IDE 44Pin to SATA Adapter 2.5" HDD SSD Converter Board

SKU CH-E6WQ-2ZWVK

Converts a 2.5 inch IDE 44Pin drive to SATA for laptop upgrades up to 500GB with no extra power needed

  • Converts 2.5 inch IDE drives to SATA using a 44 pin interface
  • Supports transfer rates of 66, 100 and 133 MB/s for faster data access
  • Works with drives up to 500 GB capacity for ample storage space
  • Operates without an extra power supply and requires no driver installation
  • Compact board measures 69 mm by 14 mm by 17 mm to fit tight laptop bays

Compact 44-pin IDE to SATA adapter

This LORDWORLD converter board lets you connect a 2.5-inch IDE hard drive or SSD to a SATA interface. It measures 69 by 14 by 17 millimetres and draws power directly from the drive connector. The unit is designed for upgrading legacy laptops or embedded systems that still use 44-pin IDE storage.

Suits legacy laptop upgrades; not for larger drives

The adapter works with any 2.5-inch IDE drive up to 500 GB and supports IDE transfer modes at 66, 100 and 133 MB/s. It requires no extra power supply or driver installation and is compatible with DOS, Windows 98 through Vista, Windows 7 and Linux. Buyers needing 3.5-inch desktop drive support or capacities above 500 GB should look at a different solution.

Handles 500 GB IDE drives at up to 133 MB/s

The board comfortably runs 2.5-inch IDE hard drives and SSDs within the 500 GB limit at the full IDE 133 MB/s rate. It does not support hot-swap operation, so the host system must be powered down before swapping drives. Performance will be constrained by the native IDE interface rather than the SATA link.

Highlights

  • Converts 2.5 inch IDE drives to SATA using a 44 pin interface
  • Supports transfer rates of 66, 100 and 133 MB/s for faster data access
  • Works with drives up to 500 GB capacity for ample storage space
  • Operates without an extra power supply and requires no driver installation
  • Compact board measures 69 mm by 14 mm by 17 mm to fit tight laptop bays

Specifications

BrandLORDWORLD

Questions about this item

Will my 2.5 inch IDE 44Pin drive need a separate power cable to work with this adapter?

No extra power supply is needed; the adapter draws power through the IDE 44Pin connection itself.

Can I keep using my laptop's IDE 66 or 100 controller with a new SATA drive on this board?

Yes, the adapter supports IDE 66, 100 and 133MB/s modes so it works with those older controllers.

How do I confirm the SATA drive is recognised after fitting the 69mm by 14mm board?

The drive should appear in BIOS or the operating system immediately because the adapter is plug and play with no driver required.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.