We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Short black HDMI cable with 90 degree upward angled gold connector

LORDWORLD

LORDWORLD HDMI 2.1 Cable 8K 48Gbps 90° UP Angled 0.5m

SKU CH-XP4N-F5ACZ

A 0.5 m HDMI 2.1 cable with a 90° upward angled connector, 4.0 mm ultra-thin profile and 48 Gbps bandwidth for 8K, 1440p and 1080p video

  • 90° angled connector routes neatly in tight spaces
  • 0 mm ultra-thin cable bends easily for gimbal rigs
  • 48 Gbps bandwidth carries 8K and 1440p video
  • Gold-plated connectors resist corrosion for reliable contact
  • Backwards compatible with HDMI 1.3 through 2.1 devices

8K HDMI 2.1 cable with 90° UP angled connector

This LORDWORLD cable carries HDMI 2.1 signals at 48 Gbps bandwidth over a .5 metre length. The 90° upward-angled Type A male plug routes neatly against a wall or tight panel. Gold-plated contacts and a welded strain-relief resist accidental tugs. The 4.0 mm ultra-thin jacket suits gimbals, stabilisers and compact rigs.

Replaces standard straight HDMI leads in cramped

Swap a straight cable when the socket faces upward and clearance is under a few centimetres. The angled head prevents the plug from fouling a mounted TV, monitor or camera cage. The jump is worth it if the straight connector would bend the cable sharply or block adjacent ports. No benefit appears if ample rear space already exists.

Limited to HDMI 2.1 48 Gbps feature set

Bandwidth caps at 48 Gbps, so 8K, 1440p and 1080p video pass through but higher future rates will not. Ethernet channel is supported within the HDMI spec. The fixed .5 m length rules out longer runs without an active extender. Devices limited to HDMI 1.3, 1.4, 2.0 or 2.0b will operate at their own lower ceilings.

Highlights

  • 90° angled connector routes neatly in tight spaces
  • 0 mm ultra-thin cable bends easily for gimbal rigs
  • 48 Gbps bandwidth carries 8K and 1440p video
  • Gold-plated connectors resist corrosion for reliable contact
  • Backwards compatible with HDMI 1.3 through 2.1 devices

Specifications

BrandLORDWORLD

Questions about this item

What clearance does the 90° UP angled HDMI Type A plug need above the port?

The 90° UP angle routes the cable upward from the port; allow at least the 4.0 mm cable diameter plus the moulded plug height for a clean bend without stress.

How do I seat the gold-plated HDMI Type A connectors without damaging the welded strain relief?

Align the connector, press straight in until it clicks; do not rock or lever the heavy moulded ends — the welded design handles tugs but not sideways torque during insertion.

When should I replace this 0.5 m 48 Gbps cable to keep 8K 1440p 1080p performance reliable?

Replace if the ultra-thin jacket shows kinks, the gold pins discolour, or intermittent signal appears — the welded ends resist pull damage but repeated tight bends in gimbal rigs degrade the 4.0 mm cores over time.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.