We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black FireWire 400 cable with 6-pin male connectors on both ends, 1.8m length

LORDWORLD

LORDWORLD FireWire 400 6-Pin to 6-Pin Cable 1.8m

SKU CH-T988-ACT2Y

Connects FireWire 400 devices with 6-pin ports at up to 400 Mbps using a 1.8 m shielded cable

  • Plug-and-play convenience with hot-swap support for FireWire devices
  • 8 m cable length suits desktop and portable setups
  • Twisted-pair construction with triple shielding minimises crosstalk
  • Data rates up to 400 Mbps per IEEE 1394a specification
  • Meets FireWire 400 and 1394a standards for broad compatibility

LORDWORLD FireWire 400 Cable

This LORDWORLD cable connects two FireWire 400 devices using 6-pin male connectors on each end. It measures 1.8 metres and supports data rates up to 400 Mbps. The twisted pair construction and triple shielding reduce cross talk. It meets IEEE 1394a specifications for reliable performance.

Suitable for legacy FireWire 400 equipment

This cable suits users linking camcorders, external drives or audio interfaces that have 6-pin IEEE 1394a ports. Plug-and-play and hot-swap support allow connection without shutting down the computer. Buyers needing 4-pin or 9-pin connectors, or longer cable runs, should look at other options.

6-pin to 6-pin IEEE 1394a interface

The decisive specification is the 6-pin to 6-pin FireWire 400 interface compliant with IEEE 1394a. Both connected devices must present a 6-pin port for this cable to function. Verify the port type on your hardware before purchasing.

Highlights

  • Plug-and-play convenience with hot-swap support for FireWire devices
  • 8 m cable length suits desktop and portable setups
  • Twisted-pair construction with triple shielding minimises crosstalk
  • Data rates up to 400 Mbps per IEEE 1394a specification
  • Meets FireWire 400 and 1394a standards for broad compatibility

Specifications

BrandLORDWORLD

Questions about this item

What comes in the box and is anything else needed to connect two FireWire 400 devices?

The box contains one 1.8 m cable with 6-pin male connectors on both ends. No extra adapters or drivers are required; just plug each end into a 6-pin FireWire 400 port.

The cable is listed as 1.8 m — is that the only length available for this model?

Yes, this model is supplied only in the 1.8 m length. If you need a shorter or longer run you would have to choose a different cable.

The spec says 400 Mbps — what speed will I actually see when transferring video from a DV camcorder?

The 400 Mbps figure is the interface maximum. Real-world throughput depends on the camcorder and the host controller, but the twisted-pair, triple-shielded design keeps the link running at the full FireWire 400 rate the device supports.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.