We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Y-cable with two USB-A plugs and one Micro-USB 3.0 plug, 60cm black cable

LORDWORLD

LORDWORLD Dual USB-A to Micro-USB3.0 Y-Cable 60cm

SKU CH-5YSE-218VD

Y-cable draws power from two USB-A ports to run one Micro-USB 3.0 device at up to 5 Gbps and 10 W

  • Delivers up to 10W peak power from two USB ports
  • 5Gbps data transfer via USB 3.1/3.0 primary connector
  • Second USB 2.0 connector supplies extra power only
  • 60cm length suits desktop and portable drives
  • Backward compatible with USB 2.0 and 1.1 devices

Power solution for under-powered ports

The LORDWORLD Dual USB-A to Micro-USB3.0 Y-Cable draws current from two Type-A ports so a single 2.5-inch drive or similar device receives enough power to spin up and run. One connector carries USB 3.0 data and power while the second supplies only extra power. This 60 cm cable suits users whose laptop or desktop port cannot deliver the required current on its own. It is not for buyers who need a single-cable connection without an auxiliary power leg.

5 Gbps data with 10 W peak delivery

The primary USB 3.0 leg supports a 5 Gbps signalling rate and complies with USB 3.1 and 3.0 specifications, while the auxiliary leg follows USB 2.0 at 480 Mbps for power only. Together they can provide up to DC 5 V 2 A, yielding a peak of 10 W when both ports are active. Backward compatibility covers USB 2.0 Hi-Speed and USB 1.1 Low-Speed at 1.5 Mbps.

Steady current under sustained load

When both Type-A plugs remain seated in powered ports the cable maintains the 5 V 2 A throughput continuously, avoiding the voltage drops that cause drives to disconnect during long transfers. The auxiliary leg carries no data, so signalling integrity on the primary link stays stable while the extra current reservoir handles prolonged read or write sessions without thermal throttling.

Highlights

  • Delivers up to 10W peak power from two USB ports
  • 5Gbps data transfer via USB 3.1/3.0 primary connector
  • Second USB 2.0 connector supplies extra power only
  • 60cm length suits desktop and portable drives
  • Backward compatible with USB 2.0 and 1.1 devices

Specifications

BrandLORDWORLD

Questions about this item

What does the 5 Gbps rating mean when I plug the Micro-USB 3.0 end into my portable drive?

The data path runs at USB 3.0 speed, so the drive can reach up to 5 Gbps if the host port and device both support that rate.

How does the dual Type-A design affect power and data on the two ports?

One Type-A plug carries USB 3.0 power and data; the second Type-A plug supplies extra USB 2.0 power only and transfers no data.

What physical clearance do I need for the 60 cm cable and the Y-split?

The cable is 60 cm long with a Y-split near the Type-A ends, so allow space for two adjacent USB ports on the host side.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.