We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Blue panel-mount cable with dual USB 3.0 Type-A ports and a 20-pin header, 50cm long

LORDWORLD

LORDWORLD Dual USB 3.0 Panel Mount to 20-Pin Header Cable 50cm Blue

SKU CH-T74D-8WKT4

Panel-mount cable converts a motherboard 20-pin header into two USB 3.0 Type-A ports with screw holes, supporting 5 Gbps transfer

  • Two USB 3.0 Type-A ports from one 20-pin header
  • Panel-mount design with two screw holes for secure chassis fitting
  • 50 cm cable length suits front-panel routing
  • Compliant with USB 3.0 specification for broad compatibility
  • Up to 5 Gbps throughput with USB 3.0 host and device

Front-panel USB 3.0 adapter

This cable converts a single motherboard 20-pin header into two panel-mount Type-A ports. It is designed for builders who need front-panel USB 3.0 access on a chassis that lacks native ports. The 50 cm length suits standard tower layouts. Two screw holes on the female bracket allow secure mounting.

Passive design and power

The adapter draws power directly from the motherboard header and adds no active cooling or circuitry. In normal use it produces no audible noise and negligible heat. Power consumption is limited to the USB 3.0 specification for downstream devices connected to the two ports.

Single 20-pin header requirement

Your motherboard must provide one free 19-pin or 20-pin USB 3.0 header to run both ports at 5 Gbps. Boards with only USB 2.0 headers or without any internal header cannot support this adapter.

Highlights

  • Two USB 3.0 Type-A ports from one 20-pin header
  • Panel-mount design with two screw holes for secure chassis fitting
  • 50 cm cable length suits front-panel routing
  • Compliant with USB 3.0 specification for broad compatibility
  • Up to 5 Gbps throughput with USB 3.0 host and device

Specifications

BrandLORDWORLD

Questions about this item

How do I install the panel-mount USB 3.0 ports to my chassis front panel?

Mount the female Type-A connector using its two screw holes, then plug the single 20-pin header cable into the motherboard USB 3.0 header.

What maintenance or replacement will this cable need over time?

No scheduled maintenance is required; replace only if the cable or connectors suffer physical damage.

What limits sustained throughput on this cable?

The USB 3.0 specification caps throughput at 5 Gbps when paired with a USB 3.0 host and device.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.