We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green circuit board with two M.2 slots and a slimline SFF-8654 connector

LORDWORLD

LORDWORLD Dual NVME PCIe 3.0 4.0 SFF-8654 8X Raid Adapter

SKU CH-6B2H-G2D0S

Connects two NVME drives via PCIe 3.0 or 4.0 using an SFF-8654 8X interface for software RAID

  • Run two NVMe drives at full speed simultaneously
  • Dual NVMe slot design enables concurrent operation
  • Built-in high-power DC modules deliver stable power
  • Requires motherboard with PCIe bifurcation for dual-drive recognition
  • Virtual RAID via Windows 10 or third-party software only

Dual NVMe SFF-8654 RAID Adapter

This adapter connects two NVMe solid-state drives to a motherboard via a single SFF-8654 8X link using PCI Express 3.0 or 4.0 signalling. It is intended for system builders who want to run both drives at full speed simultaneously without a hardware RAID controller.

Suits Windows 10 software RAID setups

The card creates virtual RAID 0 arrays only under Windows 10 or through third-party software utilities. It requires a motherboard that can split PCIe lanes; boards without lane bifurcation will detect only one drive. Buyers needing true hardware RAID or bootable arrays independent of the operating system should look elsewhere.

Requires PCIe lane bifurcation support

The single specification that determines compatibility is whether the host platform can divide its PCI Express lanes to expose two separate endpoints. Without that capability the second NVMe slot remains invisible to the system.

Highlights

  • Run two NVMe drives at full speed simultaneously
  • Dual NVMe slot design enables concurrent operation
  • Built-in high-power DC modules deliver stable power
  • Requires motherboard with PCIe bifurcation for dual-drive recognition
  • Virtual RAID via Windows 10 or third-party software only

Specifications

BrandLORDWORLD

Questions about this item

How do I install the adapter and what is the common mistake with motherboard PCIe channels?

Insert the card into a PCIe slot, attach two NVME drives to the onboard sockets, and connect the SFF-8654 cable to the motherboard header. The step often missed is confirming the motherboard supports PCIe bifurcation; without it only one drive will be detected.

What maintenance or replacement will the on-board DC power modules need?

The built-in high-power DC modules are soldered to the PCB and have no user-serviceable parts. If a module fails the entire adapter must be replaced; no periodic maintenance is required.

What limit appears first when both NVME drives run sustained workloads?

The adapter can run two NVME drives at full PCIe 3.0 or 4.0 speed simultaneously, so the first bottleneck will be the thermal or power envelope of the drives themselves rather than the card.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.