We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Down-angled 90-degree OCuLink SFF-8611 male-to-male active cable, 50cm length

LORDWORLD

LORDWORLD Down Angled 90° OCuLink SFF-8611 4i Active Cable 50cm

SKU CH-AY7J-2019G

Down-angled 90° OCuLink SFF-8611 active cable carries PCIe 4.0 at 64 Gbps for tight internal connections

  • Secure active-latch lock prevents accidental disconnects
  • Downward 90° angled connectors fit tight spaces around female ports
  • 50 cm length suits compact internal routing between devices
  • Carries PCIe 4.0 signals at up to 64 Gbps over OCuLink protocol
  • Connects SFF-8611 male to SFF-8611 male for backplane-to-controller links

Down Angled OCuLink Cable 50cm

This 50cm active cable carries PCI Express 4.0 traffic over OCuLink SFF-8611 male-to-male connectors. The down-angled 90-degree ends let you plug into tight backplane or controller ports without stressing the latch. It supports data rates up to 64Gbps for internal device links.

Suits compact eGPU and SSD builds

Builders routing cables in cramped chassis will appreciate the low-profile angled plugs. The cable needs a free OCuLink interface on each end, so systems without that port cannot use it. Buyers who need longer reach or straight connectors should look at something else.

Active 64Gbps PCIe 4.0 link

The single specification that decides fit is the 64Gbps active signal rating over PCI Express 4.0. If your backplane or controller demands that throughput, this cable meets it; if the link budget requires a different rate or passive design, this part will not work.

Highlights

  • Secure active-latch lock prevents accidental disconnects
  • Downward 90° angled connectors fit tight spaces around female ports
  • 50 cm length suits compact internal routing between devices
  • Carries PCIe 4.0 signals at up to 64 Gbps over OCuLink protocol
  • Connects SFF-8611 male to SFF-8611 male for backplane-to-controller links

Specifications

BrandLORDWORLD

Questions about this item

How do I install the 50cm OCuLink SFF-8611 cable without blocking adjacent slots?

Align the down-angled 90° connector with the female OCuLink port, press until the active latch clicks, then route the cable away from the motherboard; the angle keeps the plug low so neighbouring cards or drive cages stay clear.

What upkeep will this active OCuLink cable need over time?

No scheduled maintenance is required; inspect the latch and connector pins during any hardware change, and replace the cable only if the latch fails to hold or signal errors appear.

Which limit appears first when the link runs at full load for long periods?

The 64Gbps PCIe 4.0 ceiling is the first hard bound; sustained traffic that fills four lanes at the rated rate cannot exceed this throughput.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.