We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Short 30 cm DisplayPort extension cable with upward-angled male plug and straight female socket, thin 4.0 mm black cable

LORDWORLD

LORDWORLD DisplayPort 1.4 Angled Extension Cable 30cm

SKU CH-D7E6-B8AEM

A 30 cm DisplayPort 1.4 extension with an angled male-to-female connector, 32.4 Gbps bandwidth and a 4.0 mm ultrafine cable for tight spaces

  • Fits tight spaces with a 30 cm ultrafine 4.0 mm cable
  • Angled connector eases installation where port clearance is limited
  • Panel-mount female end extends the link to a cabinet device
  • 4 Gbps bandwidth carries 8K 60 Hz and 4K 144 Hz video
  • Supports 1440p and 1080p resolutions without signal loss

Compact DisplayPort 1.4 extension for tight rear I/O

The LORDWORLD angled extension cable adds 30 cm of reach to a DisplayPort 1.4 link. It supports 8K at 60 Hz, 4K at 144 Hz and 1440p signals at the full 32.4 Gbps bandwidth. The 4.0 mm ultrafine jacket keeps routing tidy inside small cases or behind wall-mounted panels. Ideal for builders who need a short, high-quality male-to-female link without bulk.

Simple plug-in with an upward-angled DP male end

The upward-angled connector slips into a graphics-card or motherboard port even when adjacent cables or a back-plate leave little clearance. No drivers or configuration are required; the cable is passive and transparent to the link. The only common issue is accidentally ordering a downward angle when the port orientation calls for upward, so verify the port layout before purchase.

Check your source port orientation

Ensure the host port faces upward so the angled plug clears surrounding connectors. Confirm that the combined length of this 30 cm extension plus your existing DisplayPort cable stays within the DisplayPort 1.4 specification for the target resolution. This cable does not add power or active signal conditioning, so marginal links will not be corrected.

Highlights

  • Fits tight spaces with a 30 cm ultrafine 4.0 mm cable
  • Angled connector eases installation where port clearance is limited
  • Panel-mount female end extends the link to a cabinet device
  • 4 Gbps bandwidth carries 8K 60 Hz and 4K 144 Hz video
  • Supports 1440p and 1080p resolutions without signal loss

Specifications

BrandLORDWORLD

Questions about this item

How can I confirm the extension cable is delivering the full 32.4Gbps bandwidth after connecting it?

Verify your graphics driver reports the target resolution at the expected refresh rate — 8K at 60Hz or 4K at 144Hz — and run a DisplayPort link-speed test to confirm HBR3 operation.

What comes with the cable and what must I supply separately?

The box contains the 30cm angled DisplayPort 1.4 male-to-female extension cable only; you must provide the primary DisplayPort cable and the panel-mount cutout if you intend to secure the female end.

Which resolution and refresh-rate combination should I choose for my setup?

Match the cable's certified limits: 8K at 60Hz for maximum detail, 4K at 144Hz for high-refresh gaming, or 1440p and 1080p at any supported rate your monitor and GPU allow.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.