We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black DC 5.5x2.5mm plug to four SATA power connectors with inline step-down board, 37.5inch cable

LORDWORLD

LORDWORLD DC 5.5x2.5mm to 4 SATA Power Cable 37.5inch

SKU CH-5VZB-E4JNB

Converts a 12V DC 5.5x2.5mm supply to four 5V SATA power connectors using a step-down regulator board and 18AWG tinned copper wire over 37.5 inches

  • Converts 12 V DC 5.5×2.5 mm input to four 5 V SATA drives
  • Built-in step-down regulator delivers stable 5 V power for hard disks
  • 18 AWG tinned-copper 1007 wire ensures reliable current delivery
  • 5 inch total length gives flexible routing inside cases
  • 8 mm panel-hole diameter allows secure bulkhead mounting

DC 5.5x2.5mm to 4 SATA Power Cable

This adapter converts a 12V DC 5.5x2.5mm power source into four 5V SATA power connectors for hard drives. It is designed for builders and technicians who need to run multiple SATA drives from a single DC barrel supply. The integrated step-down regulator board handles the voltage conversion safely. The cable uses standard tinned copper 1007 18AWG wire for reliable current delivery.

12V to 5V step-down regulator

The built-in conversion board reduces the input 12V down to the 5V required by SATA hard drives. Without this regulator a 12V barrel supply would damage the drives. The board is permanently attached to the cable assembly so no extra wiring is needed. This single specification determines whether the adapter matches your power source and drive requirements.

37.5 inch total length and 8 mm mounting hole

The full cable run measures 37.5 inches from the DC plug to the last SATA connector, giving enough reach for typical chassis layouts. If you plan to secure the barrel jack to a panel, the required hole diameter is 8 mm. No other accessories, software or mounting hardware are included in the package.

Highlights

  • Converts 12 V DC 5.5×2.5 mm input to four 5 V SATA drives
  • Built-in step-down regulator delivers stable 5 V power for hard disks
  • 18 AWG tinned-copper 1007 wire ensures reliable current delivery
  • 5 inch total length gives flexible routing inside cases
  • 8 mm panel-hole diameter allows secure bulkhead mounting

Specifications

BrandLORDWORLD

Questions about this item

Will the 12 V DC 5.5×2.5 mm input safely run four SATA drives at once?

The built-in step-down regulator converts the 12 V supply to 5 V for each SATA connector, so all four drives receive the correct voltage from a single DC 5525 source.

What wire gauge is used and does it meet a recognised hook-up wire standard?

The leads are 18 AWG tinned copper manufactured to the UL 1007 hook-up wire specification.

How large a mounting hole is needed for the DC barrel jack?

An 8 mm diameter hole is required to secure the 5.5 mm outer-diameter barrel connector.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.