We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular die-cast aluminium IP68 converter with wiring terminals

LORDWORLD

LORDWORLD DC 12V/24V to 6V 25A 150W Waterproof IP68 Converter

SKU CH-YVTF-N2GCP

Waterproof IP68 DC 12V/24V to 6V converter delivers 25A and 150W with 94% efficiency and auto-recovery protection

  • Converts 12V or 24V input to stable 6V output
  • Delivers up to 25A continuous current for high-demand loads
  • Handles 150W power with 94% maximum efficiency
  • IP68 waterproof aluminium housing resists shock and moisture
  • Five built-in protections with auto-recovery after fault clearance

DC 12V/24V step-down converter for 6V systems

This LORDWORLD converter accepts a DC input between 12 V and 24 V and delivers a regulated 6 V output at up to 25 A. It suits vehicles, boats or off-grid rigs that need to run 6 V accessories from a higher-voltage battery bank. The IP68-rated enclosure allows permanent outdoor or wet-location mounting.

Thermals noise and power draw in normal use

The die-cast aluminium shell acts as a heatsink and is rated IP68 for water and dust ingress. Maximum conversion efficiency reaches 94 %, so waste heat stays low even at the full 150 W rating. Protections include over-load, over-current, over-temperature, short-circuit and over-voltage with auto-recovery once conditions return to normal.

25 A continuous output decides suitability

The 25 A limit at 6 V defines the maximum load the unit can sustain. Buyers whose 6 V equipment draws more current must choose a higher-rated converter. The regulator also requires a stable DC source; generator or solar inputs need external filtering to keep voltage within the accepted range.

Highlights

  • Converts 12V or 24V input to stable 6V output
  • Delivers up to 25A continuous current for high-demand loads
  • Handles 150W power with 94% maximum efficiency
  • IP68 waterproof aluminium housing resists shock and moisture
  • Five built-in protections with auto-recovery after fault clearance

Specifications

BrandLORDWORLD

Questions about this item

How do I wire the IP68 converter so the input polarity is correct and the step most people miss?

Connect a stable 12 V or 24 V DC source to the input terminals observing the marked polarity, then fit a filter capacitor if the source is a generator or solar panel whose open-circuit voltage could exceed the converter’s maximum withstand voltage.

What maintenance will the 150 W unit need after long-term outdoor use?

The die-cast aluminium shell is moisture-proof and anti-shock; no scheduled maintenance is required beyond checking that cable glands remain tight and vents stay clear of debris.

At what point does the 25 A converter hit its thermal limit during continuous load?

Over-temperature protection triggers before damage occurs, and the unit auto-recovers once the temperature returns to normal operating range.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.