We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Aluminium alloy CFexpress Type-B reader with 2230 NVME adapter inside

LORDWORLD

LORDWORLD CFexpress Type-B Reader Alloy Shell 2230 Adapter Kit

SKU CH-A4KR-AER21

Turns a 2230 NVMe drive into a CFexpress Type-B card with an alloy shell for 8K RAW capture at up to 1000-2000MB/s

  • Supports RAW 4K and 8K video capture
  • Read and write speeds up to 1000-2000 MB/s via NVME PCIe Gen3x2
  • Aluminium alloy shell protects against shock, moisture, X-rays and extreme temperatures
  • Accepts user-installed 2230 SSDs thinner than 2.2 mm
  • CFexpress Type B form factor fits next-generation DSLR, cinema and mirrorless cameras

Ready-to-use CFexpress Type B storage

The kit converts a user-supplied 2230 NVME SSD into a CFexpress Type B card for cameras that record RAW 4K or 8K video. It targets photographers and videographers who want removable high-speed media without buying proprietary cards. No storage is included, so the buyer must provide a compatible drive.

Passive alloy shell runs without noise

The aluminium enclosure protects the installed SSD from shock, moisture, magnetic fields, X-ray exposure and temperature extremes. Because there are no moving parts or active cooling, operation is silent and power draw is limited to the drive itself. The host camera or reader supplies all required energy.

Adapter kit enables standard NVME drive use

The bundle includes the CFexpress Type B carrier and a 2230-to-CFexpress adapter so a standard M-key NVME SSD can be fitted. The drive must be thinner than 2.2 mm to seat correctly. Sequential throughput reaches 1000-2000 MB/s depending on the chosen SSD, host device and shooting conditions.

Highlights

  • Supports RAW 4K and 8K video capture
  • Read and write speeds up to 1000-2000 MB/s via NVME PCIe Gen3x2
  • Aluminium alloy shell protects against shock, moisture, X-rays and extreme temperatures
  • Accepts user-installed 2230 SSDs thinner than 2.2 mm
  • CFexpress Type B form factor fits next-generation DSLR, cinema and mirrorless cameras

Specifications

BrandLORDWORLD

Questions about this item

How do I install the 2230 SSD into the adapter, and what mistake should I avoid?

Insert the M-key NVMe 2230 SSD into the internal slot, then close the alloy shell; the critical step is confirming the drive is thinner than 2.2 mm, otherwise it will not fit.

What maintenance or replacement will this reader need over time?

The reader itself has no wear parts; only the user-supplied 2230 SSD may eventually require replacement if its write endurance is exceeded.

What limit appears first during sustained 8K RAW recording?

The NVMe PCIe Gen3x2 interface caps sequential throughput at 1000-2000 MB/s, so that bus ceiling is reached before the alloy shell’s thermal limits.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.