LORDWORLD
LORDWORLD Audio Omni USB Digital Audio Conditioner 8000mAh
USB digital audio conditioner with dual-fibre optical isolation, three ANC USB ports, 8000mAh battery-only mode, 10MHz clock input and 24/192kHz coaxial and optical outputs
- Noise-free data transmission via dual-fibre 10G/1.25G optical isolation
- Three ANC-enabled USB Pure Ports for clean power delivery
- 8000mAh battery with battery-only mode isolates from mains
- PD3.0 quick charging passthrough powers connected source device
- Real-time voltage, current, power and noise display per USB port
Audio Conditioner for Noise-Free Streaming
The LORDWORLD Audio Omni is a USB digital audio conditioner built for listeners who want cleaner signal paths between a source and a DAC. It uses dedicated dual-fibre optical isolation at 10G and 1.25G rates to break ground loops and remove digital noise from the data stream. Three ANC-enabled USB Pure Ports and two dedicated power supply ports separate clean audio power from noisy bus power. An internal 8000mAh battery enables a battery-only mode that isolates the system from both the source and the mains.
Optical Isolation Breaks Ground Loops
The single specification that decides fit is the dual-fibre 10G and 1.25G optical isolation layer between the incoming USB data and the outgoing audio outputs. This galvanic barrier stops conducted noise and ground potential differences from reaching a connected DAC. Without this isolation, upstream switching noise rides the USB shield and degrades the analogue output stage. With it, the conditioner delivers a noise-free digital feed suitable for high-resolution playback chains.
Battery Operation Frees Placement
The 8000mAh battery with BMS charging optimisation lets the unit run in battery-only mode, removing the need for a nearby mains socket or a noisy wall wart. A dual-head USB cable provides fully isolated power and data connections to the source device. PD 3.0 quick-charge passthrough keeps the source powered while the conditioner operates. Coaxial and optical S/PDIF outputs at 24/192kHz, plus a 10MHz clock input, integrate with external DACs. Real-time voltage, current, power and noise readouts for each USB port aid troubleshooting.
Highlights
- Noise-free data transmission via dual-fibre 10G/1.25G optical isolation
- Three ANC-enabled USB Pure Ports for clean power delivery
- 8000mAh battery with battery-only mode isolates from mains
- PD3.0 quick charging passthrough powers connected source device
- Real-time voltage, current, power and noise display per USB port
Specifications
| Brand | LORDWORLD |
|---|
Questions about this item
What does the 8000mAh battery actually do for my audio chain?
The 8000mAh battery powers the unit in a battery-only mode that isolates both power and data from the source and mains, removing ground-loop noise while the BMS optimises charging to extend lifespan.
How does the dual-fibre 10G and 1.25G optical isolation affect the USB connection?
The dedicated dual-fibre optical isolation breaks the electrical path for noise-free data transmission at up to 10G and 1.25G rates, while the three ANC-enabled USB Pure Ports provide cleaned power and data to connected devices.
What physical connections do I need for the coaxial and optical outputs?
The unit provides Hi-Res 24/192kHz Coaxial and Optical S/PDIF outputs, including Normal and Enhanced Coaxial options, plus a 10MHz synchronous clock input for precise timing with your DAC.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



