We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
ATX Molex Micro Fit 3.0mm 4-pin male to open wire adapter cable 15cm 20AWG UL1007

LORDWORLD

LORDWORLD ATX Molex Micro Fit 3.0mm 4Pin Male to Open Wire Adapter Cable 15cm 20AWG UL1007

SKU CH-YGPS-Y9TD7

Connects a 3.0 mm pitch Micro-Fit 4-pin male header to open wires using 20 AWG UL1007 cable at 15 cm length

  • ATX power ready with Molex Micro Fit 3.0 mm 4-pin male connector
  • Flexible routing from 15 cm 20 AWG UL1007 open-wire leads
  • Reliable current handling via 20 AWG copper conductors
  • Safety-rated insulation meets UL1007 standard
  • Quick integration for custom power harness builds

ATX Molex Micro Fit Adapter Cable

This 15cm adapter cable connects a 4-pin male Micro Fit 3.0mm connector to open wire leads. It suits builders who need to link ATX power pins to custom devices or test equipment. The 20AWG UL1007 wiring meets the listed safety standard. It is not for users who require a pre-terminated connector on both ends.

Build Integration With Open Leads

The open-wire ends let you solder or crimp the exact terminals your project demands, freeing you from fixed pinouts. A 3.0mm pitch matches the specified Micro Fit header on the host side. The 15cm length keeps cable routing tidy inside a chassis or test bench. Builders who need a longer reach or a different wire gauge cannot use this cable.

Thermals And Power In Normal Use

The 20AWG conductors carry typical ATX auxiliary currents without noticeable heating during standard operation. UL1007 insulation remains stable at the temperatures seen inside a powered PC. No active cooling or extra airflow is required for the cable itself. Users running sustained high-current loads beyond the wire rating should verify suitability before installation.

Highlights

  • ATX power ready with Molex Micro Fit 3.0 mm 4-pin male connector
  • Flexible routing from 15 cm 20 AWG UL1007 open-wire leads
  • Reliable current handling via 20 AWG copper conductors
  • Safety-rated insulation meets UL1007 standard
  • Quick integration for custom power harness builds

Specifications

BrandLORDWORLD

Questions about this item

How long is the 4-pin Micro-Fit adapter cable?

The cable measures 15 cm from the 4-pin male Micro-Fit 3.0 mm connector to the open-wire ends.

Will the 20 AWG UL1007 wires get hot during continuous use?

The 20 AWG UL1007 conductors are rated for the current levels typical of ATX auxiliary power, so they stay cool under normal sustained loads.

What mating connector must already be on the device for this cable to plug in?

You need a matching 4-pin Micro-Fit 3.0 mm female header on the target device for the male plug to seat correctly.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.