We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small green circuit board with right-angled M.2 slot and gold edge connector

LORDWORLD

LORDWORLD 90 Degree Angled PCI-E 4.0 NVME M.2 2230 to 2280 SSD Adapter

SKU CH-HP05-Z7H28

A 90-degree angled PCIe 4.0 adapter that converts an M.2 2230 slot to fit a 2280 NVME SSD in the ROG Ally

  • Add a full-size 2280 NVME drive to your ROG Ally with this 90-degree angled adapter
  • PCI-Express 4.0 x4 link keeps the new SSD running at its rated speed
  • Fits M-Key 2230 to 2280 NVME drives only — no SATA conversion supported
  • Physical installation takes roughly 20 minutes using the included extension board
  • Clone the system to the new drive then swap the original 2230 module to complete the upgrade

2230 to 2280 NVME Adapter

This 90 degree angled adapter converts the M.2 2230 slot in a ROG Ally handheld console to accept full length 2280 NVME SSDs. It uses a PCI-E 4.0 x4 interface to maintain drive speed. The board is designed specifically for this handheld upgrade path.

Capacity and Headroom

The adapter supports NVME drives up to 8TB, removing the tight space limit of the factory 2230 form factor. It cannot convert NVME signals to SATA or SATA to NVME, so only NVME drives are compatible. Performance scales with the installed drive and the console's PCI-E 4.0 link.

Build Integration

Installation takes roughly 20 minutes: mount the 2280 SSD on the board, clone the system, then swap the original drive. The angled design fits the ROG Ally chassis without blocking other components. No extra power cables or brackets are required beyond the board itself.

Highlights

  • Add a full-size 2280 NVME drive to your ROG Ally with this 90-degree angled adapter
  • PCI-Express 4.0 x4 link keeps the new SSD running at its rated speed
  • Fits M-Key 2230 to 2280 NVME drives only — no SATA conversion supported
  • Physical installation takes roughly 20 minutes using the included extension board
  • Clone the system to the new drive then swap the original 2230 module to complete the upgrade

Specifications

BrandLORDWORLD

Questions about this item

Will the 90 degree angled PCI-E 4.0 adapter fit inside my ROG Ally alongside the existing cooling hardware?

The 90 degree angled design is built specifically for the ROG Ally chassis, allowing the 2280 SSD to sit parallel to the motherboard without interfering with the original thermal solution.

How can I verify the adapter is running at PCI-E 4.0 x4 speeds after installation?

Check the link speed in the ROG Ally BIOS or use a tool like CrystalDiskInfo; it should report PCIe 4.0 x4 for the installed 2280 NVME drive.

Does the package include a 2280 NVME SSD or only the converter board?

Only the M-Key 2230 to 2280 converter board is supplied; a compatible 2280 NVME SSD must be purchased separately.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.