We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Seven inch IPS touchscreen display module with HDMI and USB connections

LORDWORLD

LORDWORLD 7 inch Capacitive Touch Screen IPS Display HDMI LCD Module 1024x600

SKU CH-BP41-39SJ4

A 7-inch IPS display with capacitive touch connects via HDMI and USB for Raspberry Pi and desktop use

  • Driver-free touch on Raspberry Pi with USB and HDMI
  • Five-point capacitive input on 1024 by 600 IPS panel
  • Backlight off option reduces power draw
  • Works with Pi 4, 3, 2, Zero and other boards
  • Driver-free on Windows 10, 8.1, 8, 7 as desktop monitor

7 inch capacitive IPS touch display

The LORDWORLD 7 inch module combines an IPS panel with a capacitive touch layer at 1024x600 resolution. It connects to a host through HDMI for video and USB for touch input. The unit is aimed at makers, educators and developers building Raspberry Pi, BeagleBone or Banana Pi projects that need interactive visual output.

Driver-free operation on supported systems

On Raspberry Pi the screen works with Raspbian, Ubuntu, Kali, Retropie and Windows 10 IoT without extra drivers. As a general desktop monitor it supports Windows 10, 8.1, 8 and 7 with five-point touch, also driver-free. A backlight-off function reduces power draw when the display is idle. Correct config.txt settings are required on Pi to prevent abnormal operation.

HDMI and USB connectivity for daily use

The HDMI and USB cables carry both signal and touch data, so the display integrates directly into a Pi or PC workflow. The IPS panel gives wide viewing angles for bench testing or kiosk mounting. Buyers who need a larger panel, higher pixel density or a different aspect ratio should consider other sizes.

Highlights

  • Driver-free touch on Raspberry Pi with USB and HDMI
  • Five-point capacitive input on 1024 by 600 IPS panel
  • Backlight off option reduces power draw
  • Works with Pi 4, 3, 2, Zero and other boards
  • Driver-free on Windows 10, 8.1, 8, 7 as desktop monitor

Specifications

BrandLORDWORLD

Questions about this item

How do I replace the capacitive touch panel if it stops responding?

The touch panel is bonded to the 7 inch IPS LCD; a failure requires replacing the complete display module rather than the touch layer alone.

What limits continuous operation on a Raspberry Pi 4B?

The HDMI interface must be set to hdmi_drive=1 in config.txt and the dtoverlay=vc4-fkms-V3D line removed, otherwise the panel can enter abnormal states and flicker.

How much heat or noise does the backlight produce when left on all day?

The backlight can be turned off via software to cut power draw and heat; with it on the IPS panel runs silently and generates only modest warmth.

New to this? Buying PC parts with Monero — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.