We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Four short DIY power cables with Type-C, Micro-USB, DC 5.5x2.1mm and 3.5x1.35mm connectors

LORDWORLD

LORDWORLD 4pcs DIY Power Extension Cable Set 10cm USB 2.0 DC 5.5x2.1mm 3.5x1.35mm Type-C Micro-USB

SKU CH-Z9BR-XGX1N

A four-cable DIY kit with USB 2.0 Type-C, Micro-USB, DC 5.5×2.1 mm and DC 3.5×1.35 mm connectors for backpack-mounted power up to 5 V 3 A, 10 cm each, solder required

  • 10 cm cables fit neatly inside a backpack
  • Four connector types cover USB-C, Micro-USB and two DC barrel sizes
  • Up to 5 V 3 A throughput with USB 2.0 power sources
  • Designed for DIY soldering to create custom power leads
  • Powers heating pads, LED lights and mobile devices

Backpack Power Cable Set

This LORDWORLD set provides four 10 cm extension cables for DIY backpack power installations. It includes USB Type-C, Micro-USB, DC 5.5x2.1 mm and DC 3.5x1.35 mm connectors to link a power bank with heated pads, lights or mobile devices. Each cable must be soldered by the builder. The kit is intended for custom OEM projects inside bags or enclosures.

USB 2.0 DC 5V 3A Limit

The cables support up to DC 5 V at 3 A when paired with a USB 2.0 source and device. Makers adding heated clothing, LED strips or phone charging to a backpack will find the connector variety useful. Buyers who need longer cables, pre-assembled ends or higher voltage power delivery should look elsewhere.

Solder-Required Assembly

Every cable in the pack arrives without plugs fitted; the user must solder each connection. This single requirement decides whether the set suits the project. If soldering tools or skills are not available, the cables cannot be used as supplied.

Highlights

  • 10 cm cables fit neatly inside a backpack
  • Four connector types cover USB-C, Micro-USB and two DC barrel sizes
  • Up to 5 V 3 A throughput with USB 2.0 power sources
  • Designed for DIY soldering to create custom power leads
  • Powers heating pads, LED lights and mobile devices

Specifications

BrandLORDWORLD

Questions about this item

How can I verify the extension cable set delivers the rated 5 V 3 A throughput after I solder and install it?

Use a USB 2.0 power source and a multimeter or USB power meter at the device end to confirm 5 V and up to 3 A under load.

Which connectors are included in the four-piece kit and do I need any extra parts to complete the installation?

The kit contains one Type-C, one Micro-USB, one DC 5.5×2.1 mm and one DC 3.5×1.35 mm cable; you must supply solder, a soldering iron and heat-shrink or insulation yourself.

How do I choose among the four connector types for my heated pad or LED project?

Match the connector to your device's input port — Type-C or Micro-USB for USB-powered gear, 5.5×2.1 mm or 3.5×1.35 mm barrel jack for DC-powered pads and lights.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.