We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular silver metal box with built-in fan and vented sides

LORDWORLD

LORDWORLD 36V 16.6A 600W AC-DC Power Supply

SKU CH-PMCH-BM405

Converts 110V or 220V AC to 36V DC at up to 16.6A with built-in fan cooling and overload protection for CCTV, car jacks and automation gear

  • Delivers 36 V DC at up to 16.6 A for 600 W peak power
  • Built-in fan and ventilated aluminium shell keep temperatures low during continuous operation
  • Over-voltage, under-voltage and over-temperature protection guard connected equipment
  • Compact 21.5 × 11.5 × 5 cm enclosure weighs .75 kg for easy mounting
  • Accepts 110 V or 220 V AC input for worldwide use

36V 600W AC-DC Power Supply

The LORDWORLD unit converts 110V or 220V AC input into a regulated 36V DC output rated at 16.6A and 600W peak. It is built for technicians and installers who need a compact mains-powered source for 36V equipment such as CCTV systems, amplifiers, LED drivers or automation gear.

Capacity and headroom

Continuous loading must stay at or below 80 percent of the peak rating, so resistive loads should not exceed 13.2A or 480W. Motor-driven devices like winches or car jacks draw surge current that can push the supply past its thermal limits, so the unit is not recommended for battery charging or speed-control motors.

Upgrade from lower-wattage adapters

Builders replacing a smaller 36V brick gain the headroom to run several devices simultaneously without voltage sag. The jump is worthwhile when the combined steady-state draw approaches 480W or when the aluminium shell and forced-air cooling are needed for long duty cycles in an enclosure.

Highlights

  • Delivers 36 V DC at up to 16.6 A for 600 W peak power
  • Built-in fan and ventilated aluminium shell keep temperatures low during continuous operation
  • Over-voltage, under-voltage and over-temperature protection guard connected equipment
  • Compact 21.5 × 11.5 × 5 cm enclosure weighs .75 kg for easy mounting
  • Accepts 110 V or 220 V AC input for worldwide use

Specifications

BrandLORDWORLD

Questions about this item

Will this 36 V 600 W supply share a chassis with older 110 V or 220 V gear without mains conflicts?

Yes, the unit accepts both 110 V and 220 V AC input, so it can sit beside legacy equipment on the same circuit without voltage mismatch.

How can I confirm the built-in cooling fan is operating correctly after installation?

Listen for the fan spinning and feel airflow through the multiple holes in the aluminum alloy shell; the metal housing should stay warm but not excessively hot under load.

What comes in the box and what must I source separately for a 36 V car jack project?

The supply itself is included; you will need to provide your own AC mains cable, DC output wiring and any connectors required by the car jack.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.