We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green circuit board with two USB 3.0 Type-C ports and M.2 B-key slot

LORDWORLD

LORDWORLD 2x USB 3.0 Type-C M.2 PCIe Adapter SATA B Key 2280 2260 2242 2230

SKU CH-4J49-TYYYG

Adds two USB 3.0 and Type-C ports for SATA M.2 B-Key drives in 2230, 2242, 2260 and 2280 sizes

  • Add two SATA M.2 SSDs via a single PCIe slot
  • Supports 2230 2242 2260 2280 form factors
  • USB 3.0 and Type-C ports included
  • PCIe 3.0 controller handles both drives
  • New condition ready for immediate install

Dual SATA M.2 to PCIe adapter

The LORDWORLD board fits a PCI Express 3.0 slot and exposes two M.2 sockets that accept B-key SATA modules in 2230, 2242, 2260 and 2280 lengths. A USB 3.0 header and a USB Type-C port on the bracket provide extra front-panel connectivity for the host system. It is built for desktop PCs that need additional SATA solid-state storage without using drive bays.

Desktop builders adding SATA M.2 drives

This card suits enthusiasts upgrading an older motherboard that lacks native M.2 slots but has a free PCIe x4 or x8 lane. Laptop technicians and embedded-system integrators should look elsewhere because the full-height bracket and desktop power delivery do not match their form-factor or voltage requirements.

B-key SATA protocol support

The adapter only communicates with M.2 drives that implement the SATA interface on a B-key edge connector; drives using other signalling standards will not function in these sockets.

Highlights

  • Add two SATA M.2 SSDs via a single PCIe slot
  • Supports 2230 2242 2260 2280 form factors
  • USB 3.0 and Type-C ports included
  • PCIe 3.0 controller handles both drives
  • New condition ready for immediate install

Specifications

BrandLORDWORLD

Questions about this item

Will the B-key M.2 SATA SSD slot need any firmware updates or jumper changes later?

The adapter uses a passive PCIe 3.0 controller for SATA B-key drives, so no firmware updates or jumper settings are required after installation.

What throughput ceiling appears first when both M.2 SATA drives run at full speed?

Each drive is limited to the SATA 6 Gbit/s interface, and the shared USB 3.0 Type-C link caps combined throughput at 5 Gbit/s.

How hot does the controller get and does it need active cooling during all-day transfers?

The low-power PCIe-to-SATA bridge runs cool enough for passive operation; no fan or heatsink is needed for continuous use.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.