We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 30cm cable with 9-pin header, two USB-A ports on 120mm PCI-E bracket, SATA power connector

LORDWORLD

LORDWORLD 2-Port USB 2.0 Front Panel Header 9-Pin to 2 Female 30cm with 120mm PCI-E Bracket SATA Power

SKU CH-9408-E3BJ7

Adds two USB 2.0 ports to a motherboard 9-pin header with a 30 cm cable, 120 mm PCI-E bracket and SATA power for 5 V 2 A delivery

  • Converts a motherboard 9-pin header into two USB 2.0 Type-A ports
  • 30 cm cable with 120 mm PCI-E bracket fits standard chassis slots
  • SATA power connector supplies up to 5 V 2 A for power-hungry devices
  • Supports USB 2.0 hubs, SSDs, cameras and other Type-A peripherals
  • Compliant with USB 2.0 specification for 480 Mbps throughput

Front-panel USB expansion

This adapter converts a single motherboard 9-pin header into two external USB 2.0 Type-A ports. A 30cm cable runs to a 120mm PCI-E bracket that mounts in a rear expansion slot. Builders adding front-panel connectivity to cases with limited internal headers can use it for hubs, SSDs or cameras.

Thermals noise and power

The device draws supplementary power through a SATA connector, delivering up to 5V 2A DC current to attached peripherals. No active cooling or fan is present, so operation is silent. The SATA power cable is not included and must be sourced separately.

Bundled bracket and SATA port

The included PCI-E bracket secures the two female ports at the chassis rear for a tidy installation. The SATA power input enables reliable operation of bus-powered 2.5in drives that exceed standard header current limits. The adapter complies with USB 2.0 specification for 480Mbps throughput with compatible hosts and devices.

Highlights

  • Converts a motherboard 9-pin header into two USB 2.0 Type-A ports
  • 30 cm cable with 120 mm PCI-E bracket fits standard chassis slots
  • SATA power connector supplies up to 5 V 2 A for power-hungry devices
  • Supports USB 2.0 hubs, SSDs, cameras and other Type-A peripherals
  • Compliant with USB 2.0 specification for 480 Mbps throughput

Specifications

BrandLORDWORLD

Questions about this item

How do I install the 9-pin header on my motherboard and where does the 120mm PCI-E bracket go?

Plug the 9-pin male connector into the motherboard USB 2.0 front-panel header, then secure the 120mm bracket into a rear PCI-E slot opening; the 30cm cable reaches between them.

Will the SATA power connector need replacement or maintenance over time?

The SATA power plug is a passive connector with no moving parts; it only needs reseating if a drive loses power, otherwise it lasts the life of the build.

What throughput limit appears first when I run a 2.5-inch SSD continuously through both ports?

The USB 2.0 interface caps sustained transfer at 480Mbps shared across the two ports, so combined throughput cannot exceed that rate.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.