We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two black right-angle NEMA 6-15P plugs with rotatable housings and brass terminals

LORDWORLD

LORDWORLD 2-Pack Nema 6-15P Right Angle Rotatable AC Plug 15A 250V

SKU CH-C124-ASH4G

A 15 A 250 V NEMA 6-15P male plug that rotates to 12 positions and accepts 18 to 12 AWG cord

  • ETL certified for safe 250 V connections
  • 12-position rotation clears tight spaces
  • Brass terminals and copper blades ensure solid contact
  • Screw-lock terminals accept AWG 12 to 18 cords
  • UL 94 V-0 nylon housing resists high heat

Plug orientation flexibility

The LORDWORLD 2-pack provides two NEMA 6-15P right-angle plugs rated 15A at 250V. Each unit rotates to 12 positions so the cord can exit in the direction that best fits tight outlets or crowded power strips. The ETL listing covers both USA and Canada installations. Screw-lock terminals accept stranded wire from 18 AWG up to 12 AWG.

Thermal and electrical behaviour

Brass terminals and copper pin blades keep resistance low during continuous 15A loads. The nylon housing carries a 94V-0 vertical flame rating, meaning the material self-extinguishes if exposed to fire. No moving parts generate noise and the solid screw connections do not loosen under normal vibration or thermal cycling.

DIY wiring convenience

Supplied as a pair, the plugs let you build or repair two cords without sourcing separate parts. The screw-lock design requires only a screwdriver and works with common SJT jacketed cable in 18, 16, 14 and 12 AWG sizes. Builders needing straight-body plugs or higher amperage devices will need different components.

Highlights

  • ETL certified for safe 250 V connections
  • 12-position rotation clears tight spaces
  • Brass terminals and copper blades ensure solid contact
  • Screw-lock terminals accept AWG 12 to 18 cords
  • UL 94 V-0 nylon housing resists high heat

Specifications

BrandLORDWORLD

Questions about this item

How do I install the rotatable Nema 6-15P plug and which step is often done incorrectly?

Strip the SJT 18/16/14 or AWG 12 cord, insert each conductor into the three brass screw terminals, tighten the screws securely, then rotate the housing to one of 12 positions before final tightening; the step most often missed is fully seating the copper pin blades before locking the rotation.

What maintenance or replacement will the plug need over time?

Inspect the brass terminals and copper pin blades periodically for oxidation or loosening; retighten the screw-lock connections if they become loose, and replace the plug if the nylon housing shows cracking or the 94V-0 flame rating is compromised.

What limit appears first when the plug runs at 15 A 250 V continuously?

The 15 A rating is the primary limit; sustained loads at or above 15 A will cause the brass terminals and copper blades to heat up first, so the circuit must not exceed 15 A at 250 V.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.