We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Compact black box with side knobs and wire terminals

LORDWORLD

LORDWORLD 2-Channel 80W Adjustable Line Output Converter with Remote Turn On

SKU CH-KVX2-G2NKG

Two-channel line output converter handles 80 watts total with adjustable output and remote amplifier turn-on

  • 2-channel design adds aftermarket amp to factory stereo
  • Digital noise filter removes alternator whine and signal hiss
  • 6:1 step-down matches high-level speaker output to RCA inputs
  • 80 W total input handles 40 W per channel safely
  • DC turn-on trigger powers amplifier automatically with head unit

Two-Channel Line Output Converter

The LORDWORLD 2-channel adjustable line output converter lets you add an aftermarket amplifier to a factory stereo without replacing the head unit. It accepts speaker-level signals up to 80W total and converts them to a clean, low-level RCA output for external amplification.

Installation Notes

Wiring is straightforward: tap the high-level inputs behind the factory radio, connect the RCA outputs to your amplifier, and use the DC turn-on trigger to switch the amp on with the vehicle ignition. The 6:1 step-down ratio with adjustable output lets you match levels precisely, while the digital noise filter suppresses alternator whine and ground-loop hum that often appear when factory wiring is reused.

Sustained Operation

Rated for 40W per channel continuous input, the converter handles extended listening sessions without thermal shutdown or signal clipping. The built-in line driver maintains voltage over long RCA runs, so output stays consistent whether you are on a short commute or a cross-country drive. It is not suited for systems that demand more than the rated input power or for installations requiring more than two processing channels.

Highlights

  • 2-channel design adds aftermarket amp to factory stereo
  • Digital noise filter removes alternator whine and signal hiss
  • 6:1 step-down matches high-level speaker output to RCA inputs
  • 80 W total input handles 40 W per channel safely
  • DC turn-on trigger powers amplifier automatically with head unit

Specifications

BrandLORDWORLD

Questions about this item

How can I confirm the line output converter is working correctly after installation?

Verify that the DC amplifier turn-on trigger activates the connected amp when the head unit powers on and listen for clean audio without noise through the speakers.

What comes in the box with this 2-channel converter and what must I purchase separately?

The converter unit is included; speaker wire, RCA cables, power and ground wiring for the amplifier are not supplied.

Which version should I choose if my factory stereo delivers up to 40 watts per channel?

This model accepts 40 watts per channel and 80 watts total, matching a factory stereo rated at or below those levels.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.