LORDWORLD
LORDWORLD 2.5" SATA to USB 3.0/3.1 Type-C Enclosure 7mm 9.5mm Tool-Free UASP
Connects a 2.5" SATA drive via USB 3.0 or 3.1 Type-C with tool-free fitting and UASP support
- Tool-free drive swap in seconds with slide-open cover
- 5 Gbps peak throughput via USB 3.1 Gen 1 with UASP support
- Works with 7 mm and 9.5 mm SATA SSD or HDD
- Connects to USB-C or USB-A hosts using included cables
- Compatible with Windows, macOS, Linux, PS4, PS5, Xbox and routers
2.5″ SATA drive enclosure for USB 3.0 and USB-C
This enclosure connects a 2.5″ SATA I, II or III hard drive or SSD to a computer, laptop, router, PlayStation or Xbox through a USB 3.0 Micro-B or USB 3.1 Type-C cable. It suits drives of 7 mm or 9.5 mm height and needs no extra power supply. The tool-free design lets you swap drives quickly for data recovery or portable storage expansion.
ABS shell with dual-cable connectivity
The lightweight ABS housing slides open without tools so you can insert or remove a drive in seconds. A USB 3.0 Micro-B plug and a USB 3.1 Type-C plug are both provided, letting the same enclosure work with older Type-A ports and newer Type-C ports without an adapter. Hot-swap support means the host recognises the drive immediately after connection.
5 Gbps peak speed with UASP acceleration
The SATA interface supports the UASP protocol, which can raise throughput up to 70% over standard USB 3.0 when the host also supports UASP. Maximum transfer rate is 5 Gbps, and the enclosure falls back to USB 2.0 or 1.1 on legacy ports. This speed ceiling is the deciding factor if you move large media files or system images regularly.
Highlights
- Tool-free drive swap in seconds with slide-open cover
- 5 Gbps peak throughput via USB 3.1 Gen 1 with UASP support
- Works with 7 mm and 9.5 mm SATA SSD or HDD
- Connects to USB-C or USB-A hosts using included cables
- Compatible with Windows, macOS, Linux, PS4, PS5, Xbox and routers
Specifications
| Brand | LORDWORLD |
|---|
Questions about this item
What is the maximum data transfer speed of the USB 3.0/3.1 Type-C interface and does it support UASP?
The enclosure reaches a maximum of 5Gbps over USB 3.0/3.1 Type-C and supports UASP accelerated transmission, which is 70% faster than conventional USB 3.0 when the host also supports UASP. It is backward compatible with USB 2.0 and 1.1 ports.
Which drive heights and SATA revisions fit inside the 2.5 inch enclosure?
The tool-free tray accepts 2.5 inch SATA I, II and III hard drives or SSDs that are 7mm or 9.5mm thick.
How do you install a drive in this tool-free enclosure and what is the step people often miss?
Slide off the cover, insert the SATA drive until it seats firmly, replace the cover, then connect the USB cable to the host. The step often missed is pushing the drive all the way in so the SATA connector engages completely before closing the cover.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



