We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black metal 1U cantilever shelf with vented surface and L brackets

LORDWORLD

LORDWORLD 1U Vented Cantilever Rack Shelf 8" (203mm) Depth 19" 44lb Capacity

SKU CH-AT6X-VT1PG

A 1U vented cantilever shelf for 19-inch racks, 203 mm deep, supports 44 lb with 1.2 mm sides and adjustable lip orientation

  • Fits standard 19-inch racks with 1U height
  • 8-inch (203mm) depth suits compact equipment
  • 44 lb capacity backed by 1.2 mm steel sides
  • Reversible lip adapts to different mounting needs
  • Includes M6 and M5 hardware for quick assembly

1U Vented Cantilever Shelf 8" Depth

The LORDWORLD 1U vented cantilever shelf mounts in standard 19 racks and cabinets with an 8" (203mm) depth. It holds IT, data, network and other equipment using 1.2mm thick holding sides rated for a 44-pound maximum load. The shelf ships disassembled so the lip can be oriented up or down to suit different mounting needs. Assembly requires only the included screws to join the two holding sides.

Fixed 8" Depth and 44-Pound Limit

The shelf provides a single fixed depth of 8" (203mm), so equipment deeper than this cannot be supported without overhang. The 44-pound capacity is a hard ceiling; heavier devices will exceed the rated strength of the 1.2mm sides. Only the supplied M6 screws with cage nuts and M5 screws with nuts are included for a 19 rack, so other thread types or rack widths are not accommodated.

Upgrade from Light-Duty or Fixed-Lip Shelves

This shelf replaces lighter cantilever models that use thinner steel or lack reversible lips. The jump is worthwhile when you need the higher 44-pound rating, the ability to flip the lip for cable routing or equipment retention, and a disassembled design that fits tight packing constraints. It is not suited for buyers who need adjustable depth, sliding rails, or load ratings above 44 pounds.

Highlights

  • Fits standard 19-inch racks with 1U height
  • 8-inch (203mm) depth suits compact equipment
  • 44 lb capacity backed by 1.2 mm steel sides
  • Reversible lip adapts to different mounting needs
  • Includes M6 and M5 hardware for quick assembly

Specifications

BrandLORDWORLD

Questions about this item

What depth should I choose for my 19-inch rack?

The shelf is 8" (203 mm) deep, so it fits standard 19-inch racks and cabinets with that exact depth requirement.

How much equipment can the 44 lb capacity actually hold in a real installation?

The 1.2 mm thick holding sides support up to 44 pounds of IT, network or AV gear when mounted in a 19-inch rack.

Which mounting standard does the shelf use and what does it limit?

It mounts to standard 19-inch racks using the included M6 screws with cage nuts and M5 screws with nuts, limiting installation to that rack width.

New to this? Buying server hardware with crypto — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.