We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small black Pico PSU with 24-pin ATX connector

LORDWORLD

LORDWORLD 150W 12V DC 24-Pin Pico PSU

SKU CH-P8YS-ZV79C

A 150 watt DC-DC power supply with 24-pin ATX output for 12 volt input mini-ITX builds

  • 150 W output powers compact ITX builds
  • 12 V DC input simplifies single-voltage wiring
  • 24-pin ATX connector plugs straight into motherboard
  • Fanless design runs silently in embedded systems
  • Suits mini PCs, set-top boxes and network servers

What this pico PSU powers

The LORDWORLD unit delivers 150 watt output from a 12 volt DC source through a 24-pin ATX connector. It targets mini ITX motherboards in compact builds such as digital signage players, thin clients or embedded appliances.

Installation notes

The 24-pin plug mates directly with the board ATX socket so no adapter cable is required. Verify that the external 12 volt brick can supply the full 150 watt load; an undersized adapter is the most common cause of instability.

Sustained-load behaviour

Continuous 150 watt draw is within the design envelope for the listed applications. In a fanless ITX case the converter relies on case airflow, so ensure the chassis provides adequate ventilation for long-running server or kiosk duty.

Highlights

  • 150 W output powers compact ITX builds
  • 12 V DC input simplifies single-voltage wiring
  • 24-pin ATX connector plugs straight into motherboard
  • Fanless design runs silently in embedded systems
  • Suits mini PCs, set-top boxes and network servers

Specifications

BrandLORDWORLD

Questions about this item

How do I confirm the 150W 12V DC pico PSU is delivering stable power after connecting the 24-pin ATX connector?

The system should boot reliably and run without unexpected shutdowns; verify the 12 V rail with a multimeter under load to ensure it stays within ATX tolerance.

What cables or adapters are included with the LORDWORLD 150W pico PSU and what must I source separately?

The unit provides a 24-pin ATX output; you must supply a 12 V DC source such as an external AC-DC brick or battery and any peripheral power cables your build requires.

Which version of the 150W 12V DC pico PSU should I choose for a mini ITX motherboard with a 24-pin ATX socket?

The single 150W 12V DC input model with a 24-pin ATX connector is the correct match for mini ITX boards using that socket.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.