We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Short black adapter cable with a large four-pin dryer plug on one end and a three-hole welder socket on the other

LORDWORLD

LORDWORLD 14-50P to 6-50R 50A 250V Adapter Cable 1.5FT

SKU CH-67M1-JWJ69

Connects a NEMA 14-50P dryer outlet to a NEMA 6-50R welder plug using 100% copper 8 AWG STW cable rated for 50A at 250V

  • Connect dryer outlet to welder via NEMA 14-50P to 6-50R adapter
  • Handle 50A loads with 8AWG 100% copper STW cable
  • Durable PVC-moulded plug and receptacle with brass pins ensure solid contact
  • Compact 1.5FT length keeps work area tidy
  • Every unit 100% tested for open, short and high-voltage safety

NEMA 14-50P to 6-50R Adapter

This 1.5-foot adapter cable connects a NEMA 14-50P dryer plug to a NEMA 6-50R welder receptacle. It uses heavy-duty STW 8AWG cable with 100% copper conductors and brass pins. The assembly is rated for 50 amps at 250 volts and features PVC-moulded ends for durability. Every unit is tested for open, short and high-voltage faults.

Suits welders with 6-50 plugs

Welders or fabricators who need to power a 6-50P-equipped machine from an existing 14-50R dryer outlet will find this adapter convenient. The short 1.5-foot length keeps the connection tight but offers no reach for distant outlets. Buyers who need more cable length or a different plug configuration should look at other options.

Handles 50-amp continuous loads

The 8AWG copper cable supports the full 50-amp rating for typical welding duty cycles at 250 volts. Headroom exists for short peak draws within the connector limits. It runs out when the application demands more than 50 amps, a voltage other than 250 volts, or a longer reach than 1.5 feet allows.

Highlights

  • Connect dryer outlet to welder via NEMA 14-50P to 6-50R adapter
  • Handle 50A loads with 8AWG 100% copper STW cable
  • Durable PVC-moulded plug and receptacle with brass pins ensure solid contact
  • Compact 1.5FT length keeps work area tidy
  • Every unit 100% tested for open, short and high-voltage safety

Specifications

BrandLORDWORLD

Questions about this item

What existing outlet do I need to plug the NEMA 14-50P male end into?

You need a NEMA 14-50R dryer or range receptacle rated for 250V and 50A. The adapter’s male plug inserts directly into that outlet.

Will my welder with a NEMA 6-50P plug work with the 6-50R female socket on this cable?

Yes. The 6-50R socket accepts a standard NEMA 6-50P welding plug, providing the same 250V 50A connection your welder expects.

How can I verify the adapter is conducting power correctly after I connect it?

Turn on the welder and confirm it powers up normally. The 100% copper 8AWG conductors and brass blades deliver full 50A capacity when the circuit is live.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.