We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black FireWire cable with 4-pin and 6-pin male connectors, 120cm long

LORDWORLD

LORDWORLD 1394 6Pin to 4Pin FireWire 400 Cable 120cm

SKU CH-GB4T-YJHMD

Connects 4-pin DV camcorders or devices to a 6-pin FireWire 400 port at up to 400 Mbits with moulded strain relief and a 120 cm length

  • Connect DV camcorders to 6‑pin FireWire ports
  • Reversible design links 4‑pin laptops to 6‑pin devices
  • 120 cm length gives flexible placement
  • Supports 100/200/400 Mbit/s IEEE 1394 speeds
  • Molded strain relief protects connectors from stress

Connection bridge for legacy FireWire gear

This LORDWORLD cable links 4-pin iLink ports on DV camcorders or laptops to 6-pin IEEE 1394 sockets on desktop PCs. The 120 cm length spans typical desk-to-device distances without excess slack. It carries 100, 200 and 400 Mbits transfer rates for real-time tape capture. No drivers or external power are required for the connection.

Reversible pinout simplifies setups

Either end can serve as host or peripheral, so a 4-pin laptop port can drive a 6-pin external drive as easily as a camcorder feeds a desktop. The moulded strain reliefs absorb tugs that would otherwise fatigue the solder joints. Plug orientation is fixed by the keyed shells, preventing bent pins during blind mating.

Compact moulded shells suit tight ports

Low-profile connector bodies fit side-by-side with USB or audio jacks on crowded I/O panels. The 4-pin male and 6-pin male plugs lock with a positive click, resisting accidental disconnects during capture sessions. Cable jacket remains flexible in cool rooms, easing cable routing behind equipment racks.

Highlights

  • Connect DV camcorders to 6‑pin FireWire ports
  • Reversible design links 4‑pin laptops to 6‑pin devices
  • 120 cm length gives flexible placement
  • Supports 100/200/400 Mbit/s IEEE 1394 speeds
  • Molded strain relief protects connectors from stress

Specifications

BrandLORDWORLD

Questions about this item

Will the 4-pin or 6-pin connector wear out first with repeated plugging?

Both ends use male connectors with molded strain relief, so neither side is inherently weaker; the 120 cm cable simply connects 4-pin iLink devices to 6-pin IEEE 1394 ports.

What transfer-rate ceiling will I hit during long captures?

The cable supports IEEE 1394 speeds of 100, 200 and 400 Mbits, so sustained transfers are limited to the 400 Mbit FireWire 400 maximum.

Does the cable get warm or draw extra power when left connected all day?

The 4-pin connector carries no bus power, so the cord itself draws no current and stays at ambient temperature during continuous use.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.