We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Square 1.3 inch LCD module with joystick and four buttons on green PCB

LORDWORLD

LORDWORLD 1.3" LCD Display Module 240×240 ST7789

SKU CH-FCWH-8EHCS

1.3 inch IPS LCD module for Raspberry Pi Pico with 240×240 resolution, 65K colours, SPI interface, joystick and four buttons

  • Clear, colourful visuals with 65K RGB colours on a 1.3" IPS panel
  • Sharp 240×240 resolution for detailed graphics and text
  • Compact SPI interface keeps GPIO pins free for other peripherals
  • Built-in joystick and four buttons enable direct user interaction
  • ST7789 driver simplifies integration with Raspberry Pi Pico

Pico LCD module

The LORDWORLD 1.3" LCD Display Module connects directly to a Raspberry Pi Pico header. It provides a 240×240 IPS panel with 65K RGB colours and an on-board ST7789 driver. A joystick and four user buttons are integrated for interactive projects. The board targets makers who need a compact colour display for microcontroller applications.

SPI interface and header fit

Communication uses a SPI bus that requires only a few IO pins on the Pico. The module plugs straight onto the standard Pico header, leaving remaining pins free for sensors or actuators. No separate power supply or level shifter is needed. Builders who need a parallel interface or a larger footprint cannot use this board.

240×240 pixel canvas

The 65K colour depth suits graphical user interfaces, sensor dashboards and simple animations. The ST7789 controller handles drawing commands over SPI without burdening the microcontroller. Projects that demand higher resolution, video playback or a touch overlay will exceed the capabilities of this display.

Highlights

  • Clear, colourful visuals with 65K RGB colours on a 1.3" IPS panel
  • Sharp 240×240 resolution for detailed graphics and text
  • Compact SPI interface keeps GPIO pins free for other peripherals
  • Built-in joystick and four buttons enable direct user interaction
  • ST7789 driver simplifies integration with Raspberry Pi Pico

Specifications

BrandLORDWORLD

Questions about this item

Does the 240×240 IPS panel exhibit ghosting or colour shift after hours of continuous SPI updates?

The IPS panel maintains wide viewing angles and stable 65K RGB output during sustained SPI writes; no ghosting or colour shift is reported under normal frame rates.

How much heat or audible noise does the ST7789 driver generate when the backlight runs at full brightness all day?

The ST7789 driver and LED backlight produce negligible heat and zero audible noise during continuous operation at full brightness.

Which Raspberry Pi Pico header pins must be free for the SPI bus, joystick and four buttons to function together?

The module plugs directly into the Pico header, using the SPI pins plus dedicated GPIO lines for the joystick and four user buttons.

New to this? Buying PC parts with Monero — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.