We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small round LCD module, 1.28 inch, 240×240 pixels, 65K RGB colours, SPI interface

LORDWORLD

LORDWORLD 1.28" Round LCD Display 240×240 65K RGB SPI

SKU CH-8KRF-XSFGP

A 1.28 inch round display shows 240 by 240 pixel graphics in 65K RGB colours over a SPI bus for Raspberry Pi, Jetson Nano, Arduino and STM32 boards

  • Round 1.28" display shows vivid graphics
  • 240×240 pixel resolution delivers sharp detail
  • 65K RGB colours provide rich colour depth
  • SPI interface minimises required IO pins
  • Works with Raspberry Pi, Jetson Nano, Arduino and STM32

Compact Round LCD for Embedded Projects

The LORDWORLD 1.28inch round LCD display module delivers a 240×240 resolution with 65K RGB colours through an embedded GC9A01 driver. Its SPI interface minimises the required IO pins, making it straightforward to connect to Raspberry Pi, Jetson Nano, Arduino or STM32 boards. Development resources and code examples are included for those platforms.

Makers Needing a Small Circular Screen

This module suits hobbyists and engineers who want a compact round display for instrumentation, wearables or custom UI panels on supported single-board computers and microcontrollers. Builders who require a larger viewing area, a rectangular form factor, touch input or a parallel interface should look at alternative screens.

Steady SPI-Driven Operation

Because the display communicates over SPI, sustained rendering performance is limited by the bus speed and the host controller’s ability to feed frame data continuously. Under continuous animation or frequent redraws the refresh rate will settle at the throughput the SPI link and driver can maintain rather than a peak burst figure.

Highlights

  • Round 1.28" display shows vivid graphics
  • 240×240 pixel resolution delivers sharp detail
  • 65K RGB colours provide rich colour depth
  • SPI interface minimises required IO pins
  • Works with Raspberry Pi, Jetson Nano, Arduino and STM32

Specifications

BrandLORDWORLD

Questions about this item

Which host boards can drive the 1.28" round LCD through its SPI interface?

The module works with Raspberry Pi 4B, 3B+, 3B, 2B, Zero, Zero W, Zero WH, Jetson Nano, Arduino and STM32 boards using the SPI bus.

Can the display share the SPI bus with other peripherals on the same controller?

Yes, the SPI interface uses minimal IO pins so the screen can coexist with other SPI devices on the same host board.

How do I verify the 240×240 panel is operating correctly after wiring it up?

Run the supplied example code for your platform; the screen should show a clear, colourful test pattern at 240×240 resolution with 65K RGB colours.

New to this? Buying PC parts with Monero — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.