We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small rectangular OLED module with yellow upper and blue lower display area on a green PCB

LORDWORLD

LORDWORLD 0.96inch OLED Module 128×64 SSD1315 Yellow Blue development board

SKU CH-DCQ8-6D0XK

A compact .96 inch OLED display module with a 128×64 resolution, SSD1315 driver, SPI and I2C interfaces, and yellow-blue two-colour output for Raspberry Pi, Arduino and STM32 development

  • 96 inch OLED with 128×64 resolution shows crisp graphics
  • SSD1315 driver chip enables fast SPI and I2C communication
  • Two colour layout splits upper yellow and lower blue zones
  • Ultra narrow bezel keeps board compact for tight builds
  • Online examples speed up Raspberry Pi Arduino STM32 development

0.96-inch OLED development module

This 0.96 inch OLED display module uses an embedded SSD1315 driver chip to deliver a 128×64 pixel panel with a two-tone yellow and blue output. It communicates over both SPI and I2C interfaces and includes onboard level translation for direct connection to common development boards. Online code examples are provided for Raspberry Pi, Arduino and STM32 platforms.

Makers adding compact status displays

The small footprint and dual-colour layout suit projects that need a clear, low-power readout such as sensor dashboards, wearable prototypes or embedded instrument panels. Builders who require full-colour graphics, higher resolution or video-rate animation should consider alternative display technologies.

SSD1315 driver with SPI and I2C

The SSD1315 controller supports both 4-wire SPI and I2C protocols, letting developers choose the interface that matches their host MCU pinout and firmware stack. This single specification determines whether the module can drop into an existing design without rewiring or driver changes.

Highlights

  • 96 inch OLED with 128×64 resolution shows crisp graphics
  • SSD1315 driver chip enables fast SPI and I2C communication
  • Two colour layout splits upper yellow and lower blue zones
  • Ultra narrow bezel keeps board compact for tight builds
  • Online examples speed up Raspberry Pi Arduino STM32 development

Specifications

BrandLORDWORLD

Questions about this item

How does the 128×64 resolution look on a 0.96 inch screen in a real build?

The 128×64 pixel grid packs into a 0.96 inch diagonal, giving sharp text and simple graphics that remain readable at close range.

What does the SSD1315 driver’s I2C and SPI support mean for data speed in practice?

The SSD1315 handles both 4-wire SPI and I2C; SPI gives higher throughput for animations while I2C uses fewer GPIO pins.

What physical space and mounting does the ultra-narrow bezel board need?

The compact PCB with ultra-narrow bezel fits tight enclosures; four corner holes allow secure mounting in a project case.

New to this? Buying PC parts with Monero — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.