Loos & Co., Inc.
Loos & Co., Inc. SL2-2 Oval Sleeve 1/16 in 122 Copper
Copper oval sleeve for 1/16 in wire rope, two compressions, MS51844 standard
- Designed for lifting with MS51844 compliance
- Copper oval sleeve fits 1/16 in galvanised steel rope
- Two compressions create a secure swaged connection
- Compatible with 3x7, 6x19, 7x19 and 7x7 strand types
- 3/8 in overall length suits compact rigging assemblies
Copper oval sleeve for 1/16 in wire rope
This copper oval sleeve is designed for swaging onto 1/16 inch diameter galvanized steel wire rope. It accepts strand classifications 3 x 7, 6 x 19, 7 x 19 and 7 x 7. The fitting is rated for lifting applications and meets the MS51844 standard. It is supplied new with a plain finish.
Two compressions required for a secure joint
The single specification that decides fit is the required number of compressions: exactly two. Using fewer or more compressions than specified can compromise the swage integrity and lifting capability. Verify your swaging tool and die set can perform the two-compression sequence on a 1/4 inch outside diameter sleeve before purchase.
Minimal thermal or noise impact in service
As a passive copper fitting, the sleeve generates no operational noise and draws no power. It does not produce heat beyond ambient temperature during normal lifting or conveying use. Thermal considerations are limited to the surrounding environment and the wire rope itself.
Highlights
- Designed for lifting with MS51844 compliance
- Copper oval sleeve fits 1/16 in galvanised steel rope
- Two compressions create a secure swaged connection
- Compatible with 3x7, 6x19, 7x19 and 7x7 strand types
- 3/8 in overall length suits compact rigging assemblies
Specifications
| Brand | LOOS |
|---|
Questions about this item
What does the 1/16 in compatible rope diameter mean when the sleeve is swaged in a real machine?
It means the oval sleeve is sized for 1/16 in wire rope and requires two compressions to form a secure swage fitting for lifting.
What does the MS51844 standard cap in practice for this copper sleeve?
MS51844 defines the dimensional and performance requirements the sleeve meets for swaged wire rope terminations.
What physical space does the 3/8 in overall length and 1/4 in outside diameter need to fit or mount?
The sleeve measures 3/8 in long with a 1/4 in outside diameter, so the swage tool and assembly must accommodate those dimensions.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
