We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small stainless steel strap fork end fitting with clevis and pin hole

Loos & Co., Inc.

Loos & Co., Inc. NAS1435K2 Strap Fork End 304 SS Cable Size 1/16

SKU CH-RT00-1PH10

Stainless-steel strap fork end fits 1/16 in cable for aerospace rigging

  • TypeWheelbarrows & Carts
  • Compatible with 1/16 in stainless steel cable
  • Strap fork end design for secure attachment
  • 304 stainless steel resists corrosion
  • DFARS compliant for aerospace use
  • Clevis inside width 3/32 in fits 3/16 in pin

Strap Fork End for 1/16 Cable

The Loos NAS1435K2 strap fork end is a stainless steel wire rope clevis fitting designed for 1/16 inch diameter wire strand core rope. It provides a secure swage connection for lifting and rigging applications that require a compact fork end termination.

DFARS Compliant Stainless Construction

Manufactured from 304 stainless steel, the fitting meets DFARS compliance and National Aerospace standards for material traceability. The steel body resists corrosion in outdoor and marine environments while maintaining strength under normal lifting loads.

Swage Mounting with 3/16 Pin Hole

The clevis features a 3/32 inch inside width and accepts a 3/16 inch pin for attachment to anchors or hardware. Its 1 1/16 inch overall length keeps the assembly short, though builders needing a larger pin diameter or wider clevis gap will need a different fitting.

Highlights

  • Compatible with 1/16 in stainless steel cable
  • Strap fork end design for secure attachment
  • 304 stainless steel resists corrosion
  • DFARS compliant for aerospace use
  • Clevis inside width 3/32 in fits 3/16 in pin

Specifications

BrandLOOS
TypeWheelbarrows & Carts

Questions about this item

How do I install the Loos NAS1435K2 strap fork end on 1/16 in cable, and what step is often missed?

Swage the fitting onto 1/16 in stainless wire rope using a correctly sized swaging die; the step often missed is verifying the swage diameter with a go/no-go gauge before putting the assembly into service.

What maintenance or replacement will the 304 stainless steel strap fork end need over time?

Inspect the clevis pin and 3/32 in inside width for wear, corrosion or elongation at each service interval; replace the fitting if the pin shows galling or the fork ears spread beyond the original gap.

What limit appears first on the NAS1435K2 fitting during sustained lifting use?

The 3/16 in clevis pin bearing surface typically reaches its allowable bearing stress before the 304 stainless fork body yields, making pin wear the first limiting factor under continuous load.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.