Loos & Co., Inc.
Loos & Co., Inc. MS20668-5 Eye End Fitting 5/32 in Stainless Steel
Stainless steel eye end fitting for 5/32 in rope, swaged 1/4 in OD with 13/64 in eye thickness and 19/64 in shank, meets MIL-DTL-781
- TypeWheelbarrows & Carts
- Stainless steel construction resists corrosion in outdoor environments
- DFARS compliant and meets MIL-DTL-781 military standards
- Swaged 1/4 inch outside diameter ensures secure rope attachment
- 5/32 inch rope compatibility suits various rigging applications
- Designed for lifting operations with reliable eye end fitting
Precision Eye End for 5/32 in Rope
This stainless-steel eye end fitting is made for 5/32 in diameter rope and meets MIL-DTL-781 and DFARS requirements. It is built for lifting applications where a fixed eye is needed on galvanized or stainless wire rope. The component is supplied new and intended for rigging assemblies that demand military-grade traceability.
Swaged Joint Holds Under Continuous Tension
The fitting is swaged to a 1/4 in outside diameter with a 13/64 in eye thickness and a 19/64 in shank diameter, creating a permanent termination that resists creep under sustained load. Stainless construction prevents corrosion from weakening the joint during long-term outdoor or marine exposure. The eye inside diameter of 1/4 in maintains consistent geometry through repeated loading cycles.
Compact Stainless Hardware for Direct Attachment
The small eye profile allows direct connection to shackles, hooks or thimbles without adding bulk to the assembly. Stainless steel material matches stainless rope to avoid galvanic corrosion in mixed-metal rigs. DFARS compliance confirms the fitting meets U.S. defence sourcing rules for government or contractor projects.
Highlights
- Stainless steel construction resists corrosion in outdoor environments
- DFARS compliant and meets MIL-DTL-781 military standards
- Swaged 1/4 inch outside diameter ensures secure rope attachment
- 5/32 inch rope compatibility suits various rigging applications
- Designed for lifting operations with reliable eye end fitting
Specifications
| Brand | LOOS |
|---|---|
| Type | Wheelbarrows & Carts |
Questions about this item
Does the 1/4 in eye inside diameter create any vibration noise under constant load?
The stainless-steel eye end fitting has no moving parts, so it produces no vibration noise when installed correctly.
What rope and swaging tools are required to install the 5/32 in diameter fitting?
You need 5/32 in galvanised or stainless-steel rope and a swaging tool sized for a 1/4 in outside diameter.
Will the 13/64 in eye thickness and 19/64 in shank mate with existing MIL-DTL-781 hardware?
Yes, the fitting meets MIL-DTL-781 and DFARS standards, so it matches legacy hardware built to the same specification.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
