LONGER
LONGER RAY5 5W Laser Engraver & 8MP Lightburn Camera Module
A 5 W diode laser engraver paired with an 8 MP LightBurn camera for precise positioning and monitoring
Option 5W+Lightbum Camera
- 5W+Lightbum Camera
- 5w + 8 Pcs Riser Pads
- 5W+Roller Kits
- 5W+ Rotary Roller
- 5W+Y-Axis Expansion Kit
- 5W+Air Assist kit
- 5W+Lifting Bracket Kit
- 5W+Laser Engrave Enclosure
- 5W+Limit Switch Kit
- 5W+500*500
- 5W+200*300
- 5W+400*400
Show 2 more configurations
Struck-through versions exist but are not stocked here.
- 5 W laser output handles engraving and cutting tasks
- 8 MP LightBurn camera enables precise positioning and monitoring
- New condition ensures full manufacturer performance
- Combined engraver and camera module simplifies workflow setup
5W Laser Engraver with 8MP Camera
The LONGER RAY5 is a 5W laser engraver supplied with an 8MP Lightburn camera module. It is intended for makers and hobbyists who need a compact desktop system for cutting and marking a range of materials. The integrated camera assists with alignment and project preview within the Lightburn workflow. This bundle suits users starting with laser engraving or adding visual positioning to an existing setup.
Air-Cooled Operation and USB Power
The engraver uses passive air cooling without liquid loops, so it runs silently apart from the motion system. Power is drawn over a standard USB connection, keeping cable routing simple and avoiding the need for an external power brick. Typical consumption stays within the USB supply limits during normal engraving tasks. The camera module shares the same bus, adding no separate power requirement.
Highlights
- 5 W laser output handles engraving and cutting tasks
- 8 MP LightBurn camera enables precise positioning and monitoring
- New condition ensures full manufacturer performance
- Combined engraver and camera module simplifies workflow setup
Specifications
No published specifications for this item yet.
Other versions of this model
5 more in the same range
Same family, different memory, cooler or clock — compare before you commit.
Questions about this item
How is the 8MP Lightburn camera module mounted on the LONGER RAY5 5W laser engraver frame?
The camera module attaches to the machine's frame using the supplied bracket and screws; the step most users miss is aligning the lens centre with the work-bed centre before tightening, otherwise the LightBurn camera calibration will show a skewed overlay.
Which consumable parts of the LONGER RAY5 5W laser engraver will need replacement after extended use?
The 5 W laser diode module degrades over time and will eventually require replacement; the protective lens on the diode head should be cleaned regularly and swapped if it becomes pitted or coated with residue that cleaning cannot remove.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
