LONGER
LONGER RAY5 5W Laser Engraver 3.5" Touchscreen 24000mm/min
- Laser Engraver & Cu…
$111.99
0.00132592BTC
In stock
LONGER
LONGER RAY5 20W Upgraded Laser Engraver 400×365mm
20 W laser engraver with a 400 × 365 mm work area, 0.08 × 0.1 mm spot, 3.5" touchscreen and four connection modes
- TypeLaser Engraver
- Faster engraving and cutting with 20 W laser power
- Ultra-fine 0.08 × 0.1 mm spot for sharp detail
- 256-colour capability adds vivid contrast on metal and glass
- 5″ colour touchscreen plus USB, TF card, Wi-Fi and app control
- 400 × 365 mm work area handles large wood, acrylic and steel pieces
20 W Laser Engraver for Makers
The LONGER RAY5 is a 20 W diode laser engraver built for hobbyists and small workshops that need a single machine for engraving and cutting wood, acrylic, leather, paper, glass, plastics and thin stainless steel. It arrives new with all tools and a manual for quick assembly.
400 × 365 mm Work Area
The usable bed measures 400 mm by 365 mm, which decides whether a project fits without re-positioning. A 0.08 × 0.1 mm compressed spot and 256-colour greyscale give fine detail on metal, glass and wood.
Sustained 10 000 mm/min Throughput
The manufacturer rates continuous processing speed at 10 000 mm/min, lower than the 24 000 mm/min peak, so plan jobs around the sustained rate for consistent results over long runs. An air-assist port helps keep optics clean during extended cuts.
Highlights
- Faster engraving and cutting with 20 W laser power
- Ultra-fine 0.08 × 0.1 mm spot for sharp detail
- 256-colour capability adds vivid contrast on metal and glass
- 5″ colour touchscreen plus USB, TF card, Wi-Fi and app control
- 400 × 365 mm work area handles large wood, acrylic and steel pieces
Specifications
| Type | Laser Engraver |
|---|
Other versions of this model
2 more in the same range
Same family, different memory, cooler or clock — compare before you commit.
Questions about this item
What does the 20 W laser power mean for cutting thickness on this engraver?
The 20 W output lets the machine cut 25 mm wood and 35 mm acrylic in a single pass, and it can cut 0.05 mm stainless steel.
How do the USB, TF card, Wi-Fi and app connections limit file transfer or job control?
All four modes let you send jobs directly to the 3.5" touchscreen controller; the machine then runs the file offline so transfer speed does not affect engraving quality.
What bench space and mounting points does the 400×365 mm work area require?
The frame needs a flat surface at least 400 mm by 365 mm plus clearance for the gantry rails and the built-in touchscreen housing.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
