LONGER
LONGER RAY5 10W Laser Engraver with Air Assist Kit Rotary Roller 8 Pcs Raiser
A 10W diode laser engraver with a 400x400mm bed, 0.06mm spot, air assist, rotary roller and eight raisers for metal, glass and wood
- Cuts 20 mm wood and 30 mm acrylic with 400 mm square work area
- 06 mm laser spot produces ultra-fine detail on metal glass wood
- 10 000 mm per minute engraving speed via dual-beam technology
- 32-bit motherboard with Wi-Fi USB app TF card and offline control
- 5 inch touchscreen plus rotary roller and 8 raisers expand project options
10 W diode laser engraver with 400 mm bed
The LONGER RAY5 is a 10 W diode laser engraver built around a 400 mm by 400 mm work area. It ships with an air-assist kit, a rotary roller and eight raisers so users can tackle taller objects. The machine is aimed at hobbyists and small workshops that cut wood, acrylic, glass or coated metal and want a single package for flat and cylindrical jobs.
Frame assembly and wireless workflow
The unit arrives as a semi-assembled gantry that bolts together with standard hex keys; most builders finish mechanical assembly in under an hour. Bed levelling is manual, so the first test cuts often reveal uneven focus until the four corners are dialled in. Wi-Fi, USB, TF card and the 3.5 inch touchscreen all share the same 32-bit controller, and the offline mode lets you start a job without a computer once the G-code is on the card.
Continuous cutting with air assist
During long cuts the air-assist nozzle clears smoke from the 0.06 mm spot, keeping the 10 000 mm/min feed rate stable through 20 mm wood and 30 mm acrylic. The diode module is passively cooled, so surface temperature rises steadily; after roughly thirty minutes at full power the housing becomes hot to the touch and the controller may throttle speed to protect the laser. Users running multi-hour batches should plan cool-down pauses or add external airflow.
Highlights
- Cuts 20 mm wood and 30 mm acrylic with 400 mm square work area
- 06 mm laser spot produces ultra-fine detail on metal glass wood
- 10 000 mm per minute engraving speed via dual-beam technology
- 32-bit motherboard with Wi-Fi USB app TF card and offline control
- 5 inch touchscreen plus rotary roller and 8 raisers expand project options
Specifications
No published specifications for this item yet.
Questions about this item
How do I confirm the 0.06 mm spot size is producing clean cuts on 20 mm wood after setup?
Run a test cut on scrap wood at the 10 000 mm/min maximum speed and check that the kerf matches the 0.06 mm specification and the edge is smooth through the full 20 mm thickness.
What accessories are included and what must I source separately for rotary work?
The box contains the 10 W laser module, air assist kit, rotary roller and eight raisers; you only need to supply the workpiece and any design files on the TF card or via Wi-Fi.
Which configuration should I choose for the 400 × 400 mm bed and 3.5 inch touchscreen?
The single listed version already provides the 400 × 400 mm engraving area, 32-bit motherboard, 3.5 inch touchscreen and offline APP control — no alternative capacities exist.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
